2020 Hot Sale New 12V 24V Vehicle Portable Hose Crimper

2020 Hot Sale New 12V 24V Vehicle Portable Hose Crimper

Product description:

Product BM68 CNC hose crimping equipment has equipped with pc numerical control system, quickly crimp and great quality. This machine features higher crimp precision, massive power, reduced sound and effortless to function. It can make the mould base division to be much more even by means of the double inclined plane eight-flap mould seat outfitted with a high precision guiding device. BM68 CNC hose crimping machine is primarily utilised for crimping processing for higher pressure hydraulic hose assembly in the mechanical engineering. It can also be employed for crimping metal pipes, specially massive pipes and irregular condition pipes.This device characteristics modest and moveable visual appeal, huge power, reduced sound and easy to run. The buckling amount can be specific modified through a scale. It tends to make the mould foundation division to be more even through the double inclined plane 8-flap mould seat geared up with a high precision guiding unit.

Set up and Procedure
one. Include sufficiently 70 liters of Great Wall model 46# anti-abrasion hydraulic oil. If the space temperature is reduced than 10ºC, 10% transformer oil is need to have to insert.
Connect the electric powered resource properly as for each the machine demands, to make the direction of the motor rotation to be regular with the rotation path marking, and grounding safety shall be carried out.
two. Regulating the scale
The scale is used for regulating the sum of the buckling. When it is regulated clockwise, the buckling amount will reduce, when it is controlled anticlockwise, the buckling volume will increase. The scale is linked together with oil cylinder end include via 3 socket head screws and a few springs on the scale foundation. When using a hand to pull the scale (vertical to the oil cylinder end go over course), the scale can flexibly leave from the oil cylinder conclude include. When releasing the scale, the scale will be recovered JCPTing on spring pressure. Before the equipment is turned on, inspect carefully if the scale telescoping is adaptable and if the guide relationship is reputable.
3. The principal scale is turned inside of line of the secondary scale, change the machine on for take a look at run, and observe if all actions are regular. If when the piston conducts reciprocating motion, there is a crawling phenomenon, the bleed screw on the oil cylinder top shall be unscrewed for exhausting air.
four. Force regulation
The buckling pressure and opening mould pressure will be regulated by means of two knobs at the back again of the oil cylinder (see figure), when it is regulated clockwise, the pressure will improve, when it is regulated anticlockwise, the pressure will lower (The force has currently been well regulated when ex-manufacturing unit).
5. Operation 
Dependent on the size of the rubber hose to be buckled, select suited mould as for every the technological parameter reference desk of the locking pipe and mount it on the mould foundation. Regulated well the scale situation as for each the data in the info in the desk, the pipe locking can be carried out. Right after pipe locking, use a vernier caliper to mease the exterior diameter dimension of the pipe sleeve following buckling to see if it meets the reference table information of the parameter. If it does not meet the data, the scale shall be precisely regulated till it fulfills the requirements. Since the manufactures of the pipe sleeve are various, so, certain dimension, materials, hardness and so on are surely not the very same. These variables would consequence different influences on the pipe locking end result, as a result, the info in the desk is only for reference, the in depth info consider the strain take a look at as the foundation.

 Notices

  1. When buckling, make the joint to identify the mould middle as a lot as possible, the joint is not buckled on the hex nut.
  2. Stop tool and other foreign matter from coming into the locking head.
  3. Soon after the work is completed for each time, the 8-block mould base must be created to prolong to the best extent, this can make the spring to be at extension standing. If not, the spring will be hurt.
  4. When working, the hand should not stretch into the locking head.
  5. The energy supply have to be switched off when servicing is done.

Routine maintenance

  1. We will give a ensure to maintain the equipment in good restore within three years from the working day when the machine is acquired. All fitting troubles will be cost-free of demand fixed (or replaced if needed) for the duration of the promise period of time. The injury resulted from improper use o incident injury does not belong to cost-free of demand repair range.
  2. The hydraulic oil in the oil tank ought to be frequently checked, if oil sum is found to be inadequate, the oil shall be well timed supplemented. If the oil liquid is polluted, it shall be filtered or replaced.
    The locking head shall preserve inside cleanliness. Steer clear of the foreign matters during processing to enter into the locking head oil cylinder through the mould to have an effect on the standard use. Wipe out the overseas issues, which are brought by the mould entire body in time when buckling the joint.
    Usually fill appropriate grease into the mould entire body for lubrication.

Assure
We will supply a assure to keep the machine in very good fix within three several years from the working day when the device is purchased. All fitting problems will be free of charge of charge repaired (or replaced if necessary) during the promise period. The hurt resulted from inappropriate use o incident harm does not belong to totally free of charge fix assortment.

Troubleshooting

Difficulty phenomena Difficulties reason Eliminating approach
Device has not motion Oil tank has not been filled with oil Fill oil as for each need
Motor rotation path is not proper Regulate two period traces
Electrical difficulties Overhaul electric circuits
Scale is ruined The scale is fixed on the oil cylinder stop encounter by the screw Control the scale as for every the instruction to make scale to telescope freely
Conductor at scale area is connected with scale Anew link the scale conductor to make it to be insulated from scale foundation
Electrical difficulties Overhaul electric circuits and electric factors
Scale conductor chopping Anew hook up scale
Technique stress is excessively reduced Change buckling strain-regulating valve
No buckling The valve main of solenoid reversal valve is seizured by international issues Dismount solenoid reversal valve, use gasoline to thoroughly clean the valve core.
Electric powered problems Overhaul electric powered circuits
Mould is not opened Opening mould strain is excessively lower Modify opening mould force regulating valve
Electrical problems Overhaul electric circuits
Large sounds Installation is not secure Conduct horizontal secure installation
JCPT oil is excessively dirty Filter or modify it
Filter is blocked Use gasoline to clean the filter
Mould base crawls Gas in the hydraulic oil has not bee exhausted completely Suited unscrew the bleed screw, make the piston in the oil cylinder to move back again to last placement to exhaust gas, then screw down bleed screw.
Lubrication is very poor Smear grease on the functioning inclined confront of mould foundation
Oil leakage Joint is not tightened closely Tighten the oil pipe joint
Sealing washer is ruined. Substitute sealing washer.

Our support:

Pre-Revenue Service

* Inquiry and consulting assist.
* Sample testing support.
* Check out our Manufacturing facility & Office.
 

After-Sales Provider

* Guarantee for three a long time.
* Instruction how to instal and use the device.
* Supply cost-free rapid-wear element.
 
Payment Time period:

Trade Assurance

* Pay to our firm’s USD financial institution transfer BY T/T.
* 100% product good quality protection 100% on-time cargo protection 100% payment security.

T/T

* one hundred% T/T in advance(normal models in stock).
* fifty% T/T in advance, JCPT paid just before shipping(for the JCPTized versions).

Our manufacturing facility also have accept the payment by western union,paypal and cash gram.

FAQ:
one.Issue:Are you manufacturer or buying and selling organization?
Answer:We are producer because 1997.

two.Concern:Certificates ?
Solution:CE,ISO

three.Query:Shipping time?
Reply:The machines arein inventory now,can be shipped as you need.

four.Concern:What is theMOQ?
Response:one established for you examination.

five.Concern:Can I get some price cut ?
Of course, friend.The much more you get, the a lot more you conserve.

6.Concern:What is the payment?
Reply:T/T in progress,as most of our crimping machine product are in stock.
L/C,western union,paypal and funds gram also can be approved.

seven.Question:Can you make JCPTized designs or Emblem?
Of program, we are expert OEM producer.

eight.Question:Can I go to your manufacturing unit?
Sure,you are warmly welcome to go to our manufacturing facility anytime. Before the going to, you should contact us first of all and verify the visiting time, our car can pick up you to our manufacturing unit.
 

Why pick JCPT FJCPTORY?

1.Large Quality CE UL ISO approved BM68 hose crimping device.

2.Wonderful Reasonably priced handbook hose crimping machine,Ideal Quality you at any time have.

3.Samway generate the hose crimping device up to 800mm diameter hose with 2500 ton urgent pressure.

4.Fast supply, our factory can dispatch the machine inside of 24 several hours once obtain the payment and assure to ship nomally 7 doing work days on board.

Discounts available with bulk purchase

Braided hose crimper BM68 Up to 2” 6SP R15 JCPT Hose Compact in Dimension Affordable Great Device

220V 240V one phase  fifty/60hz, 380V/400v/415v/440v three period equipment have inventory.

A wonderful economical braided hose crimper will crimp up to 2″ 4SP/4SH hydraulic hose,the machine is equiped with most recent technology,Motor from SIEMENS company control method from SIEMENS,Rexroth hydraulic valves,NOK seal make the machine druable.

Finn electricity sequence braided hose crimper are primarily for support and little creation purpose,cost-effective and compact in layout,excellent for most of your requirements in hose assembly.

Primary consumers:RYCO,PIRTEK,PARKER Usa,CATERPILAR etc.

OEM provider:Our factory hydraulic hose crimping equipment for sale up to 30″,crimping range up to 1000mm obtainable,5000 ton crimping drive.

Warranty:Our factory hose crimping equipment supply 3 several years warranty from date of acquiring.

2020 Hot Sale New 12V 24V Vehicle Portable Hose Crimper

Tags:

locking collar

As one of leading locking collar manufacturers, suppliers and exporters of products, We offer locking collar and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of locking collar

Recent Posts