Ce 1 4′′ to 2′′ Finn Power Hydraulic Hose Crimping Machine

Ce 1 4′′ to 2′′ Finn Power Hydraulic Hose Crimping Machine

Item description:

Model JCPT CNC hose crimping device has equipped with personal computer numerical control method, quickly crimp and great quality. This device attributes substantial crimp precision, massive force, lower sounds and simple to operate. It makes the mould base division to be much more even by means of the double inclined aircraft eight-flap mould seat equipped with a large accuracy guiding system. JCPT CNC hose crimping machine is largely utilised for crimping processing for higher pressure hydraulic hose assembly in the mechanical engineering. It can also be used for crimping metal pipes, especially huge pipes and irregular form pipes.This equipment characteristics small and portable physical appearance, huge power, low noise and effortless to work. The buckling amount can be precise modified via a scale. It makes the mould foundation division to be a lot more even via the double inclined airplane eight-flap mould seat geared up with a substantial accuracy guiding system.

Set up and Operation
one. Incorporate sufficiently 70 liters of Wonderful Wall brand forty six# anti-abrasion hydraulic oil. If the place temperature is reduce than 10ºC, 10% transformer oil is require to insert.
Connect the electric powered supply properly as per the device demands, to make the course of the motor rotation to be constant with the rotation route marking, and grounding safety shall be carried out.
two. Regulating the scale
The scale is utilised for regulating the amount of the buckling. When it is regulated clockwise, the buckling amount will lower, when it is controlled anticlockwise, the buckling quantity will improve. The scale is related collectively with oil cylinder finish cover via 3 socket head screws and 3 springs on the scale foundation. When using a hand to pull the scale (vertical to the oil cylinder finish go over path), the scale can flexibly go away from the oil cylinder conclude include. When releasing the scale, the scale will be recovered JCPTing on spring force. Before the machine is turned on, examine meticulously if the scale telescoping is versatile and if the direct relationship is trustworthy.
3. The primary scale is turned within line of the secondary scale, turn the device on for test run, and notice if all steps are standard. If when the piston conducts reciprocating motion, there is a crawling phenomenon, the bleed screw on the oil cylinder best shall be unscrewed for exhausting air.
four. Force regulation
The buckling force and opening mould strain will be regulated by means of two knobs at the back of the oil cylinder (see figure), when it is regulated clockwise, the stress will boost, when it is controlled anticlockwise, the pressure will decrease (The force has currently been effectively controlled when ex-factory).
5. Operation 
Primarily based on the dimensions of the rubber hose to be buckled, decide on ideal mould as per the technological parameter reference desk of the locking pipe and mount it on the mould base. Regulated effectively the scale placement as for each the info in the information in the desk, the pipe locking can be carried out. Following pipe locking, use a vernier caliper to mease the outside the house diameter dimension of the pipe sleeve soon after buckling to see if it fulfills the reference desk info of the parameter. If it does not satisfy the data, the scale shall be specifically controlled until it satisfies the specifications. Since the manufactures of the pipe sleeve are distinct, so, specific dimension, substance, hardness and so on are definitely not the identical. These factors would end result diverse influences on the pipe locking outcome, consequently, the knowledge in the table is only for reference, the detailed knowledge consider the force take a look at as the foundation.

 Notices

  1. When buckling, make the joint to find the mould heart as a lot as feasible, the joint is not buckled on the hex nut.
  2. Avert instrument and other foreign subject from coming into the locking head.
  3. Following the function is finished for each and every time, the eight-block mould base have to be produced to prolong to the biggest extent, this can make the spring to be at extension position. If not, the spring will be injury.
  4. When operating, the hand need to not stretch into the locking head.
  5. The electricity provide have to be switched off when upkeep is completed.

Routine maintenance

  1. We will offer a promise to maintain the device in excellent repair inside three years from the working day when the device is purchased. All fitting difficulties will be cost-free of cost fixed (or changed if needed) in the course of the assure time period. The injury resulted from improper use o accident damage does not belong to cost-free of cost mend variety.
  2. The hydraulic oil in the oil tank must be usually checked, if oil amount is found to be insufficient, the oil shall be timely supplemented. If the oil liquid is polluted, it shall be filtered or changed.
    The locking head shall keep inside cleanliness. Keep away from the overseas matters in the course of processing to enter into the locking head oil cylinder by way of the mould to influence the standard use. Wipe out the overseas matters, which are brought by the mould body in time when buckling the joint.
    Regularly fill ideal grease into the mould entire body for lubrication.

Promise
We will supply a ensure to preserve the equipment in good restore in 3 many years from the working day when the machine is obtained. All fitting problems will be free of charge fixed (or changed if necessary) for the duration of the guarantee period. The injury resulted from poor use o incident hurt does not belong to free of charge of charge fix range.

Troubleshooting

Difficulty phenomena Problems purpose Reducing technique
Machine has not action Oil tank has not been stuffed with oil Fill oil as per necessity
Motor rotation route is not appropriate Control two phase lines
Electrical difficulty Overhaul electrical circuits
Scale is ruined The scale is fastened on the oil cylinder finish confront by the screw Control the scale as per the instruction to make scale to telescope freely
Conductor at scale area is connected with scale Anew hook up the scale conductor to make it to be insulated from scale base
Electrical trouble Overhaul electrical circuits and electrical factors
Scale conductor reducing Anew link scale
Technique stress is excessively lower Modify buckling force-regulating valve
No buckling The valve core of solenoid reversal valve is seizured by international issues Dismount solenoid reversal valve, use gasoline to cleanse the valve core.
Electric powered trouble Overhaul electric powered circuits
Mould is not opened Opening mould pressure is excessively low Adjust opening mould stress regulating valve
Electric difficulties Overhaul electric powered circuits
Massive noise Set up is not stable Conduct horizontal steady set up
JCPT oil is excessively dirty Filter or alter it
Filter is blocked Use gasoline to clean the filter
Mould base crawls Gas in the hydraulic oil has not bee fatigued fully Ideal unscrew the bleed screw, make the piston in the oil cylinder to transfer again to very last placement to exhaust gas, then screw down bleed screw.
Lubrication is bad Smear grease on the working inclined confront of mould base
Oil leakage Joint is not tightened carefully Tighten the oil pipe joint
Sealing washer is damaged. Exchange sealing washer.

Our services:

Pre-Revenue Support

* Inquiry and consulting assist.
* Sample testing support.
* See our Manufacturing unit & Business office.
 

Soon after-Product sales Provider

* Warranty for 3 many years.
* Education how to instal and use the machine.
* Give cost-free fast-use element.
 
Payment Term:

Trade Assurance

* Shell out to our company’s USD bank transfer BY T/T.
* 100% merchandise quality protection 100% on-time cargo protection 100% payment protection.

T/T

* a hundred% T/T in progress(regular types in stock).
* 50% T/T in progress, JCPT compensated prior to shipping and delivery(for the JCPTized types).

Our factory also have acknowledge the payment by western union,paypal and funds gram.

FAQ:
1.Concern:Are you maker or buying and selling organization?
Answer:We are maker considering that 1997.

2.Issue:Certificates ?
Solution:CE,ISO

three.Issue:Shipping and delivery time?
Solution:The devices arein inventory now,can be delivered as you need.

4.Query:What is theMOQ?
Answer:1 established for you check.

5.Question:Can I get some discount ?
Yes, buddy.The more you purchase, the more you preserve.

six.Issue:What is the payment?
Solution:T/T in progress,as most of our crimping device model are in stock.
L/C,western union,paypal and income gram also can be accepted.

7.Issue:Can you make JCPTized designs or Brand?
Of system, we are expert OEM manufacturer.

8.Issue:Can I visit your manufacturing facility?
Yes,you are warmly welcome to pay a visit to our manufacturing facility at any time. Just before the checking out, remember to speak to us to start with and verify the going to time, our auto can choose up you to our manufacturing facility.
 

Why select JCPT FJCPTORY?

1.Large Quality CE UL ISO approved JCPT hose crimping machine.

two.Fantastic Reasonably priced manual hose crimping machine,Best Quality you ever have.

three.Samway create the hose crimping machine up to 800mm diameter hose with 2500 ton urgent force.

four.Rapidly delivery, our manufacturing unit can dispatch the equipment inside 24 hrs as soon as receive the payment and promise to ship nomally 7 doing work days on board.

Discounts available with bulk obtain

Braided hose crimper JCPT Up to 2” 6SP R15 JCPT Hose Compact in Dimension Inexpensive Fantastic Machine

220V 240V solitary phase  50/60hz, 380V/400v/415v/440v 3 phase device have inventory.

A excellent economical braided hose crimper will crimp up to two” 4SP/4SH hydraulic hose,the machine is equiped with newest technological innovation,Motor from SIEMENS company control program from SIEMENS,Rexroth hydraulic valves,NOK seal make the machine druable.

Finn electrical power series braided hose crimper are mainly for support and tiny creation purpose,affordable and compact in layout,perfect for most of your needs in hose assembly.

Primary clientele:RYCO,PIRTEK,PARKER United states of america,CATERPILAR etc.

OEM services:Our factory hydraulic hose crimping machine for sale up to 30″,crimping variety up to 1000mm available,5000 ton crimping drive.

Warranty:Our manufacturing unit hose crimping device give three years guarantee from day of buying.

Ce 1 4′′ to 2′′ Finn Power Hydraulic Hose Crimping Machine

Tags:

locking collar

As one of leading locking collar manufacturers, suppliers and exporters of products, We offer locking collar and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of locking collar

Recent Posts