Merchandise Description
Item Description
Car Fitment | Jeep Wrangler |
OE No. | D35488 |
Pace Ratio | eight*39 |
Variety | Differential Equipment |
Materials | 20CrMnTi/ 8620 |
Hardness | HRC58-62 |
Remedy | Carburizing,Hardening, tempering,large frequency remedy,black coating,zincing,nickelage |
We can make all kinds of Crown Wheel Pinion as per your drawing or sample by our DHL account.
D3571 | 11/forty one | CJ5/7/8 DANA 30 Front STD.3.73 72-86 |
D3571TJ | eleven/41 | TJ (ninety seven-06) Front DANA thirty 3.seventy three (Short Fashion) |
D3571 | ten/forty one | CJ5/7 DANA 30 Entrance STD.4.ten |
D3571R | ten/forty one | YJ(87-ninety five) Entrance DANA 30 REVERSE 3.73 XJ(84-ninety one) |
D3571TJ | ten/41 | TJ (97-06) Front DANA 30 4.ten (Brief Fashion) |
D3 0571 | nine/41 | CJ5/7/8 DANA thirty Front STD.4.56 72/86 |
D3 0571 R | 9/41 | YJ(87/ninety five) Entrance DANA thirty REVERSE 4.fifty six XJ(84-91) |
D3 0571 TJ | nine/41 | TJ(97-06( FONT DANA 304.56 (Brief Fashion) XJ(92-01) |
D30488 | eight/39 | CJ5/7 DANA 30 Front STD.4.88 72-86 |
D30488R | eight/39 | YJ(87-95) Front DANA DANA 30 REVERSE 4.88 XJ(84-ninety one) |
D30488TJ | 8/39 | TJ Front DANA 30 4.88 (Limited Type) |
D3571JK | 8/forty one | YJ(07-21) Entrance DANA30 5.13 |
D35712(47715) | 18/forty nine | |
D35373 | 11/41 | YJ/TJ DANA 35 REAR 3.73 |
D35411 | 10/41 | YJ87-ninety five /TJ97-06/XJ93-07 DANA 35 REAR 4.10 |
D35456 | 9/41 | YJ/TJ DANA 35 REAR 4.fifty six |
D35488 | eight/39 | YJ/TJ DANA 35 REAR 4.88 |
D44373 | eleven/forty one | TJ REAR DANA forty four 3.seventy three |
D44409 | 11/45 | TJ REAR DANA 44 4.ten 22745 |
D44456R | 9/forty one | DANA 44 4.fifty six REVERSE |
D44455 | eleven/50 | TJ REAR DANA 44 4.56 22105 |
D44455X | eleven/fifty | |
D44488R | eight/39 | DANA 44 4.88 REVERSE |
D44489 | nine/44 | TJ REAR DANA 44 4.88 23053 |
D44489X | 9/44 | |
D44488X | 8/39 | RUBICON FROUT/REAR DANA 44 4.88 |
D44513R | eight/41 | DANA 44 5.13 REVERSE |
D44513 | eight/41 | TJ REAR DANA forty four 5.13 |
D44513X | eight/forty one | RUBICON FROUT/REAR DANA forty four 5.13 |
D5 0571 | Sep-41 | |
D50488 | Aug-39 | |
D5571 | Aug-forty one | |
D44-4-373 | Nov-forty one | 85719 |
D44-4-342 | Dec-41 | 80364 |
D44-4-353 | forty six/13 | 75945 |
D44-4-307 | forty three/14 | |
D44-4-346 | Nov-38 | 84707 |
D44463 | 37*eight | 74960 |
D44410 | 41*ten | 80320 |
D44373 | 41*eleven | 22736X |
D44456 | 41*nine | 85713 |
D44323 | 42*thirteen | 28744 |
D44331 | forty three*thirteen | 23592X |
D44307 | forty three*fourteen | 22106X |
D44354 | forty six*13 | 22856X |
D44427 | 47*eleven | 23064 JEEP WILLYS eleven*forty seven 8125051 ANO 1985(CJ6) |
D44427X | 47*11 | CHRYSLER |
D44538 | forty three*8 | |
D44-3-342 | forty one*twelve | 660150 |
D6571 | 37*9 | 74905 CZPT 3F,D60-411,9X37 |
D6571 | forty one*10 | 24807(FORD250) |
D6571 | 41*eleven | 25538 |
D6 0571 | forty six*thirteen | 24813 |
D6 0571 | 41*9 | FORD F250 |
D6 0571 X | forty one*9 | |
D6571 | forty one*eight | |
D6571R | forty one*eight | |
D60586 | 41*seven | |
D6571 | 43*8 | Isuzu NHR,D60-586 7*41 |
D6571R | forty three*eight | |
D60488 | 39*8 | |
D60488R | 39*eight | |
D70488 | 39*8 | 72148 |
D7571 | 41*10 | 72153 |
D7571 | 41*eleven | 72159 |
D7571 | forty one*8 | 72150 C30/P30 F350 forty one*8 5.three |
D7 0571 | 41*9 | 72152 CZPT F350 75-eighty |
D7 0571 X | 46*13 | 72168 |
D70-1-410 | forty one*ten | 72154 CZPT F350 BAJA seventy five/eighty 41*ten 4.10 |
D70586 | forty one*7 | 72156 D300/P300 41*7 5.86 |
D75-410 | forty one*10 | BA457171-X CZPT Cargo |
D75-462 | 37*8 | BA457104-X |
D8571 | forty one*eight | 73168 |
D8571 | 41*10 | 73200 |
D8571X | forty one*40 | |
D80430 | 43*10 | 76128 |
D80488 | 39*eight | 76138 |
D80463 | 37*8 | 73167 |
D8571 | 41*eleven | 76256 |
D8 0571 | forty six*13 | 73353 |
Business Profile
HangZhou CZPT Equipment is a professional manufacture of spiral bevel equipment. The firm has CNC milling device, the GLEASON milling machine, rolling inspection machine, gear measuring heart, a entire established of metallographic analysis, inspection equipment and other connected superior products.
Our company owns equipment measuring middle geared up with innovative tests devices these kinds of as contourgraph, common measuring microscope and entire set netlaaographic analysis detector. In accordance to various technical specifications and by way of techniques of sampling, special inspection and re-evaluation, multi-indexes of gears like observation, measurement and monitoring can be accomplished.
With our large quality merchandise, substantial trustworthiness and trusty cooperation, aiming to be a extremely specialized equipment maker of high stage and all-directional provider,we are hunting forward to your business negotiation and our promising cooperation.
FAQ
Q1: Are your items normal?
A: Our design is common, if you have distinct need, pls notify us the particulars.
Q2: What is you major categories?
A: Commercial Autos Like Isuzu,Nissan, Hino, CZPT ,Toyota , Mazda ,Suzuki, Agricultural Machinery and Electric powered Storage.
Q3: If we never locate what we want on your site, what need to we do?
A: You can e-mail us the descriptions and pictures of the goods you need to have, we will check whether or not we have them.
B: We build new objects every single thirty day period, and some of them have not been uploaded to internet site in time. Or you can ship us sample by express, we will create this merchandise for bulk buying.
This autumn: What is your conditions of payment?
A: T/T thirty% as deposit, and 70% ahead of shipping and delivery. We will demonstrate you the images of the goods and packages before you pay out the balance.
Q5:Do you examination all your merchandise ahead of shipping?
Sure, we have 100% test prior to shipping.
US $25-50 / Set | |
10 Sets (Min. Order) |
###
Application: | Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery, Car |
---|---|
Hardness: | Hardened Tooth Surface |
Gear Position: | External Gear |
Manufacturing Method: | Cut Gear |
Toothed Portion Shape: | Curved Gear |
Material: | Cast Steel |
###
Customization: |
Available
|
---|
###
Car Fitment | Jeep Wrangler |
OE No. | D35488 |
Speed Ratio | 8*39 |
Type | Differential Gear |
Material | 20CrMnTi/ 8620 |
Hardness | HRC58-62 |
Treatment | Carburizing,Hardening, tempering,high frequency treatment,black coating,zincing,nickelage |
###
D30373 | 11/41 | CJ5/7/8 DANA 30 FRONT STD.3.73 72-86 |
D30373TJ | 11/41 | TJ (97-06) FRONT DANA 30 3.73 (SHORT STYLE) |
D30410 | 10/41 | CJ5/7 DANA 30 FRONT STD.4.10 |
D30410R | 10/41 | YJ(87-95) FRONT DANA 30 REVERSE 3.73 XJ(84-91) |
D30410TJ | 10/41 | TJ (97-06) FRONT DANA 30 4.10 (SHORT STYLE) |
D30456 | 9/41 | CJ5/7/8 DANA 30 FRONT STD.4.56 72/86 |
D30456R | 9/41 | YJ(87/95) FRONT DANA 30 REVERSE 4.56 XJ(84-91) |
D30456TJ | 9/41 | TJ(97-06( FONT DANA 304.56 (SHORT STYLE) XJ(92-01) |
D30488 | 8/39 | CJ5/7 DANA 30 FRONT STD.4.88 72-86 |
D30488R | 8/39 | YJ(87-95) FRONT DANA DANA 30 REVERSE 4.88 XJ(84-91) |
D30488TJ | 8/39 | TJ FRONT DANA 30 4.88 (SHORT STYLE) |
D30513JK | 8/41 | YJ(07-21) FRONT DANA30 5.13 |
D30272(47715) | 18/49 | |
D35373 | 11/41 | YJ/TJ DANA 35 REAR 3.73 |
D35411 | 10/41 | YJ87-95 /TJ97-06/XJ93-07 DANA 35 REAR 4.10 |
D35456 | 9/41 | YJ/TJ DANA 35 REAR 4.56 |
D35488 | 8/39 | YJ/TJ DANA 35 REAR 4.88 |
D44373 | 11/41 | TJ REAR DANA 44 3.73 |
D44409 | 11/45 | TJ REAR DANA 44 4.10 22745 |
D44456R | 9/41 | DANA 44 4.56 REVERSE |
D44455 | 11/50 | TJ REAR DANA 44 4.56 22105 |
D44455X | 11/50 | |
D44488R | 8/39 | DANA 44 4.88 REVERSE |
D44489 | 9/44 | TJ REAR DANA 44 4.88 23053 |
D44489X | 9/44 | |
D44488X | 8/39 | RUBICON FROUT/REAR DANA 44 4.88 |
D44513R | 8/41 | DANA 44 5.13 REVERSE |
D44513 | 8/41 | TJ REAR DANA 44 5.13 |
D44513X | 8/41 | RUBICON FROUT/REAR DANA 44 5.13 |
D50456 | Sep-41 | |
D50488 | Aug-39 | |
D50513 | Aug-41 | |
D44-4-373 | Nov-41 | 80229 |
D44-4-342 | Dec-41 | 80364 |
D44-4-353 | 46/13 | 75945 |
D44-4-307 | 43/14 | |
D44-4-346 | Nov-38 | 84707 |
D44463 | 37*8 | 74960 |
D44410 | 41*10 | 80320 |
D44373 | 41*11 | 22736X |
D44456 | 41*9 | 80213 |
D44323 | 42*13 | 28744 |
D44331 | 43*13 | 23592X |
D44307 | 43*14 | 22106X |
D44354 | 46*13 | 22856X |
D44427 | 47*11 | 23064 JEEP WILLYS 11*47 8125051 ANO 1985(CJ6) |
D44427X | 47*11 | CHRYSLER |
D44538 | 43*8 | |
D44-3-342 | 41*12 | 660150 |
D60411 | 37*9 | 74905 Toyota 3F,D60-411,9X37 |
D60410 | 41*10 | 24807(FORD250) |
D60373 | 41*11 | 25538 |
D60354 | 46*13 | 24813 |
D60456 | 41*9 | FORD F250 |
D60456X | 41*9 | |
D60513 | 41*8 | |
D60513R | 41*8 | |
D60586 | 41*7 | |
D60538 | 43*8 | Isuzu NHR,D60-586 7*41 |
D60538R | 43*8 | |
D60488 | 39*8 | |
D60488R | 39*8 | |
D70488 | 39*8 | 72148 |
D70410 | 41*10 | 72153 |
D70373 | 41*11 | 72159 |
D70513 | 41*8 | 72150 C30/P30 F350 41*8 5.3 |
D70456 | 41*9 | 72152 FORD F350 75-80 |
D70354X | 46*13 | 72168 |
D70-1-410 | 41*10 | 72154 FORD F350 BAJA 75/80 41*10 4.10 |
D70586 | 41*7 | 72156 D300/P300 41*7 5.86 |
D75-410 | 41*10 | BA402071-X Ford Cargo |
D75-462 | 37*8 | BA402104-X |
D80513 | 41*8 | 73168 |
D80410 | 41*10 | 73200 |
D80410X | 41*40 | |
D80430 | 43*10 | 76128 |
D80488 | 39*8 | 76138 |
D80463 | 37*8 | 73167 |
D80373 | 41*11 | 76256 |
D80354 | 46*13 | 73353 |
US $25-50 / Set | |
10 Sets (Min. Order) |
###
Application: | Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery, Car |
---|---|
Hardness: | Hardened Tooth Surface |
Gear Position: | External Gear |
Manufacturing Method: | Cut Gear |
Toothed Portion Shape: | Curved Gear |
Material: | Cast Steel |
###
Customization: |
Available
|
---|
###
Car Fitment | Jeep Wrangler |
OE No. | D35488 |
Speed Ratio | 8*39 |
Type | Differential Gear |
Material | 20CrMnTi/ 8620 |
Hardness | HRC58-62 |
Treatment | Carburizing,Hardening, tempering,high frequency treatment,black coating,zincing,nickelage |
###
D30373 | 11/41 | CJ5/7/8 DANA 30 FRONT STD.3.73 72-86 |
D30373TJ | 11/41 | TJ (97-06) FRONT DANA 30 3.73 (SHORT STYLE) |
D30410 | 10/41 | CJ5/7 DANA 30 FRONT STD.4.10 |
D30410R | 10/41 | YJ(87-95) FRONT DANA 30 REVERSE 3.73 XJ(84-91) |
D30410TJ | 10/41 | TJ (97-06) FRONT DANA 30 4.10 (SHORT STYLE) |
D30456 | 9/41 | CJ5/7/8 DANA 30 FRONT STD.4.56 72/86 |
D30456R | 9/41 | YJ(87/95) FRONT DANA 30 REVERSE 4.56 XJ(84-91) |
D30456TJ | 9/41 | TJ(97-06( FONT DANA 304.56 (SHORT STYLE) XJ(92-01) |
D30488 | 8/39 | CJ5/7 DANA 30 FRONT STD.4.88 72-86 |
D30488R | 8/39 | YJ(87-95) FRONT DANA DANA 30 REVERSE 4.88 XJ(84-91) |
D30488TJ | 8/39 | TJ FRONT DANA 30 4.88 (SHORT STYLE) |
D30513JK | 8/41 | YJ(07-21) FRONT DANA30 5.13 |
D30272(47715) | 18/49 | |
D35373 | 11/41 | YJ/TJ DANA 35 REAR 3.73 |
D35411 | 10/41 | YJ87-95 /TJ97-06/XJ93-07 DANA 35 REAR 4.10 |
D35456 | 9/41 | YJ/TJ DANA 35 REAR 4.56 |
D35488 | 8/39 | YJ/TJ DANA 35 REAR 4.88 |
D44373 | 11/41 | TJ REAR DANA 44 3.73 |
D44409 | 11/45 | TJ REAR DANA 44 4.10 22745 |
D44456R | 9/41 | DANA 44 4.56 REVERSE |
D44455 | 11/50 | TJ REAR DANA 44 4.56 22105 |
D44455X | 11/50 | |
D44488R | 8/39 | DANA 44 4.88 REVERSE |
D44489 | 9/44 | TJ REAR DANA 44 4.88 23053 |
D44489X | 9/44 | |
D44488X | 8/39 | RUBICON FROUT/REAR DANA 44 4.88 |
D44513R | 8/41 | DANA 44 5.13 REVERSE |
D44513 | 8/41 | TJ REAR DANA 44 5.13 |
D44513X | 8/41 | RUBICON FROUT/REAR DANA 44 5.13 |
D50456 | Sep-41 | |
D50488 | Aug-39 | |
D50513 | Aug-41 | |
D44-4-373 | Nov-41 | 80229 |
D44-4-342 | Dec-41 | 80364 |
D44-4-353 | 46/13 | 75945 |
D44-4-307 | 43/14 | |
D44-4-346 | Nov-38 | 84707 |
D44463 | 37*8 | 74960 |
D44410 | 41*10 | 80320 |
D44373 | 41*11 | 22736X |
D44456 | 41*9 | 80213 |
D44323 | 42*13 | 28744 |
D44331 | 43*13 | 23592X |
D44307 | 43*14 | 22106X |
D44354 | 46*13 | 22856X |
D44427 | 47*11 | 23064 JEEP WILLYS 11*47 8125051 ANO 1985(CJ6) |
D44427X | 47*11 | CHRYSLER |
D44538 | 43*8 | |
D44-3-342 | 41*12 | 660150 |
D60411 | 37*9 | 74905 Toyota 3F,D60-411,9X37 |
D60410 | 41*10 | 24807(FORD250) |
D60373 | 41*11 | 25538 |
D60354 | 46*13 | 24813 |
D60456 | 41*9 | FORD F250 |
D60456X | 41*9 | |
D60513 | 41*8 | |
D60513R | 41*8 | |
D60586 | 41*7 | |
D60538 | 43*8 | Isuzu NHR,D60-586 7*41 |
D60538R | 43*8 | |
D60488 | 39*8 | |
D60488R | 39*8 | |
D70488 | 39*8 | 72148 |
D70410 | 41*10 | 72153 |
D70373 | 41*11 | 72159 |
D70513 | 41*8 | 72150 C30/P30 F350 41*8 5.3 |
D70456 | 41*9 | 72152 FORD F350 75-80 |
D70354X | 46*13 | 72168 |
D70-1-410 | 41*10 | 72154 FORD F350 BAJA 75/80 41*10 4.10 |
D70586 | 41*7 | 72156 D300/P300 41*7 5.86 |
D75-410 | 41*10 | BA402071-X Ford Cargo |
D75-462 | 37*8 | BA402104-X |
D80513 | 41*8 | 73168 |
D80410 | 41*10 | 73200 |
D80410X | 41*40 | |
D80430 | 43*10 | 76128 |
D80488 | 39*8 | 76138 |
D80463 | 37*8 | 73167 |
D80373 | 41*11 | 76256 |
D80354 | 46*13 | 73353 |
Types of Shaft Collars
Clamp style shaft collars
A variety of styles of shaft collars are available for your machining needs. Clamp style shaft collars offer better flexibility and hold better than set screw collars. They are best for shaft materials that are softer than a setscrew. Clamp style collars are generally easier to maneuver, as they are two-piece and are hinged along the shaft.
Clamp style shaft collars come in two-piece and one-piece designs. One-piece clamp collars are typically used for a single-piece shaft, while two-piece clamp collars are used for multiple shafts. The one-piece clamp collar provides a more uniform holding force, while two-piece clamp collars provide more clamping force and can be installed anywhere on the shaft. Both styles are available in English and metric measurements.
The holding power of Clamp style shaft collars depends on their bore size and concentricity. The fastening hardware also affects torque transmission. Forged screws are generally stronger than broached screws, and are less likely to ream out. However, you still need to make sure that the material of the collar is strong enough to withstand the recommended screw torque.
Clamp style shaft collars are available in 1215 lead-free steel with a black oxide finish and zinc plating, as well as 303 and 316 stainless steel. They are also available in 2024 aluminum with an anodized finish. They are available in a range of sizes from 1/8” to six inches and 3mm to 150mm.
One of the main benefits of Clamp style shaft collars is their versatility. The collars can be used as guides, spacers, or stops on a variety of medical equipment. They are designed to distribute compression forces around a shaft, and they can be added at any stage in the manufacturing process.
Set screw shaft collars
Set screw shaft collars are used to secure screws to shafts. They can be purchased in a variety of sizes. The external diameter, internal diameter, and width of the collar will determine the proper collar size. Some companies also offer custom and adjustable-width collars. Clamp-style shaft collars are easier to maintain, and distribute torque evenly across the shaft. They also offer twice the holding power of set screw collars.
Collars are available in metric and inch sizes. They are also available in zinc plated and black-oxide steel. In addition, they come in a variety of styles. Whether you’re looking for a custom collar, or something a little more conventional, you can find it with the help of an ISO-certified supplier.
Set screw shaft collars come in different sizes and materials. Socket collars, for example, are made of steel and have an inside diameter of 5/64″ to 1-1/8″. In addition, forged socket set screw shaft collars come in 3/16 to 4 in. They are also available with special hardware for connection to shafts.
Set screw shaft collars are commonly used on transmission and machinery. A set screw allows you to secure the collar in position by setting it into the correct position with a grub screw or a set screw. The set screw can then be adjusted with a screw driver and is a quick and easy solution for keeping a shaft in place.
Aluminum shaft collars
Aluminum shaft collars offer a number of advantages, ranging from their light weight to their corrosion resistance. Aluminum shaft collars are available in various styles and sizes, and can be plated with a variety of finishes. They are also available in lightweight styles for applications with tight space constraints. The most important factor when selecting a shaft collar is the material used to make it. Aluminum is lighter than steel and has a high strength to weight ratio. The choice of material should also depend on how much corrosion resistance is required. For example, if the shaft will be exposed to extreme environments, it is a better choice to use treated steel.
Another benefit to aluminum shaft collars is their ability to be custom-matched to the shaft. This feature helps to increase their aesthetics and branding potential. In addition, the ability to color-code components and switches can improve safety. This is especially useful in fail-safe applications. By incorporating color-coded collars, manufacturers can increase the safety of their products.
Another advantage of aluminum shaft collars is their strength. For instance, they can withstand higher torque levels than other types of shaft collars. They can be easily adjusted, and their two-piece design makes them easy to replace. Moreover, CZPT keeps the two-piece collars together during manufacturing, ensuring a perfect fit for the shaft. These collars also feature forged steel socket screws for enhanced holding power and torque capacity.
Single-piece shaft collars are also available in various styles. The set screw type has a perpendicular outer face. The set screw in these collars is used to engage the mating shaft. This type of shaft collar is a good choice for rotating assemblies.
Stainless steel shaft collars
The main function of a stainless steel shaft collar is to provide clamping force to a rotating shaft. This is achieved by a variety of methods. One of these is by bending or hammering. A shaft collar can also be made of aluminum or a combination of both. These options provide different advantages, which are described in this article.
Stainless steel shaft collars are available in different sizes, shapes, and materials. The diameter of the shaft collar may range from five-sixteenths to two-and-a-half inches. Some manufacturers produce the collars in different materials, including T304, T316, 416, and 17-4PH. Their products may also come in various shapes, such as angles, flats, structural shapes, and threaded rods.
One of the most important advantages of a stainless steel shaft collar is its strength and durability. A well-made collar can prevent wear and tear and provide excellent holding power. It also has many applications and is useful in many industries. Its application ranges from vertical conveyors to horizontal athletic equipment machinery, from agriculture to retail.
While there are numerous types of shaft collars, all three types have some common characteristics. Typically, steel shaft collars have high holding power and slim to average profiles. Heavy-duty collars have twice the holding power of low-profile collars and are used in heavy-duty construction and mining. Ultra Heavy-Duty shaft collars have the highest axial holding power and are made of steel. Shaft collars may be treated with zinc for corrosion resistance.
One manufacturer offers stainless steel shaft collars made of 303 stainless steel and other materials. It offers collars of various diameters from three-eighth to one-eighth inch. They are available in threaded, mounting, and heavy-duty styles, and are suitable for a wide range of applications, including the aerospace, energy, and medical industries.
editor by czh 2023-01-15