Cold Storage/Freezer Space with Air Conditioner Condensing Unit
Cold Storage/Freezer Room is a chamber with altered temperature, if you retailer meat and seafoods,temperature
will be around -20 degrees celsius. With freezer space, fruit and greens can be held refreshing for lengthy time.
PU Panel for Cold Storage Area
Our mould can produce 50mm , 75mm , 100mm , 120mm, 150mm , 200mm thickness panel.
For cold room , we advise using 120mm or 150mm thickness . For great rooms, we recommend making use of 100mm.
PU panel sandwich use PU high stress foaming. Having metallic materials like colour steel sheet, stainless metal
plate or some other materials as area .
Typically polyurethane refrigeratory are blended refrigeratory , assembled by polyurethane panels , it can be
assembled in various width and top . We have panels width take 960mm or 1000mm as module , nonstandard
size can be JCPTzed separareky. Internal pre-embedded cam-lock , scientific layout, compact set up,
strong sealing, straightforward construction.
Chilly Place PU Panel :
Freezer Area Condensing Unit
Compressor is the most critical gear in refrigeration equipment (It often referred to as the host refrigeration
products) . We largely provide original new origin Bitzer and Copeland brand compressor.
Compressor compresses the reduced stress steam into higher force steam, which lowers the volume of steam
and raises the strain. The compressor sucks in the lower-strain operating fluid vapor from the evaporator to improve
the strain and ship it to the condenser. The condenser condenses into a liquid with higher strain. Following the throttle
is throttled, it gets to be a liquid with a lower strain. Minimal liquid is despatched to the evaporator, absorbs warmth in the evaporator
and evaporates into lower-pressure steam, and is despatched to the inlet of the compressor, therefore finishing the refrigeration cycle.
We provide specially temperature refrigeration equipment for industrial freezer rooms. Our engineer use specialist software program
to estimate the layout proposal then choose the most ideal condensing unit and evaporator in accordance to JCPTer’s
demands. So it can help save JCPTers’ making use of fees while conference JCPTers’ refrigeration need.
Evaporator of Freezer Room
This software applies to creation versions of large temperature device cooler, as outlined under and fulfill the following conditions:
Use refrigerant R-717 for DX and/or liquid overfeed coils
Aluminum fins anti-corrosion variety
Single vertical coil
Horizontal only air stream direction (the air flows to or from the inlet experience of the coil from or to the admirer inlet, with no change in direction)
and Axial enthusiasts only.
A manufacturing facility made assembly including signifies for compelled air circulation and components by which heat is transferred from air to refrigerant
without having any component exterior to the cooler imposing air resistance. These may also be referred to as Air Cooler, Cooling Units, Air
Models or Evaporators. Device Coolers utilize a risky refrigerant fed by possibly direct expansion or liquid overfeed with ratings based mostly
on moist or dry situations.
OnlyKem Technology experienced been specializing in offering change key Frozen Cold Space for Meat and Fish to around the world JCPTers.
In current several years, we have been keeping on investing in technological innovation, built-in chilly area style and modular
JCPTization, distant monitor and control technique. All the secure and successful operation of cold rooms in milk manufacturing facility, slaughter
factory, supermarkets, foods retailers or dining places can be satisfied with our JCPTized answers by our skilled staffs and solid systems.
We experienced presented numerous kinds of successful and states of the art freezer rooms to above 45 nations around the world. Our JCPTers are from Swiss,
Sweden, Australia, United states, Canada, New Zealand, Japan, Pakistan, Spain, India, Malaysia, Singapore, Malaysia, Philippines,
South Africa, Argentina, Indonesia, Kenya, Algeria, Ghana, Guyana, Mongolia, Chile, Peru, Dubai, Poland, Mexico, Brazil, Lebanon,
Thailand, Kazakhstan, Turkmenistan, Bangladesh, Colombia, Bahrain, and so forth.
OnlyKem achievement scenario
Our workshop is the professional workshop to manufacture device cooler, condensing unit, chilly place door or PU panels.
As the foremost cold area designer and maker, JCPT has its personal eight,000 square meters condition of artwork production
manufacturing facility. Dependent on the offer chain and the manufacturing competitive benefits, some factories are wholly-owned
subsidiary and some are our joint ventures. They are located in distinct towns and integrated with every other to form the
whole cold space solution with high quality and competitive expense products. In current a long time, we experienced invested more than
one,000,000 dollars into our modern production factory to enhance the fundamental generation services , doing work situations,
worker income and welfare, technical and teamwork coaching, and so forth.
Welcome to visit our workshop for JCPT Cold Space Chilly Storage JCPT