Door Handle Magnetic Lock

Door Handle Magnetic Lock

Door Deal with Magnetic Lock

Functions
 
one. Appropriate for in-swing doorway or 90 doors
2. Built-in thrust button and electrical power indicator light.
    Adjustable doorway opening time (~nine seconds.)
3. Develop-in delay time and lock keep track of output.
4. Armature with take care of style.
five. Standalone procedure when electrical power is on and it does not need to be managed by proximity reader.
6. Install at the center of the doorway leaf to prevent deformation each time it is locked or unlock.
 

Model EL-250 Notes
Energy Offer DC 12V / DC 24V ± 15%
Existing 450mA / 12VDC 235mA / 24VDC ± 15%
Check Output N.O / N.C Hall Impact Sensor
Operation Delay Time sec., two.5sec., 5sec., 9sec.  
Software Out-swing doorway and In-swing door  
Keeping forces 600lbs  
Procedure temperature 35ºC ±5ºC (30ºC room temperature)  
Warranty The guarantee is one years under regular situations  
Weight 3 kg  

Interest
1. Door open buttons have equally developed-in and exterior inputs. Remember to use the two V- and P.S. Points for external doorway open up button. Both developed-in and exterior door open up buttons are able to be utilised at the exact same time. (Remember to refer to the diagram over) .
2. Doorway Lock standing (N.O/N.C) as Relay output. Maximum load of 1A@24VAC.
three. Indicator light-weight is eco-friendly when the doorway is locked, or else the doorway did not shut limited.

Set up

Stage one:
Make sure you stick the sticker on the wanted mounting place (Make sure you refer to Fig.one) and drill holes
according to the sticker’s indicated positions. Eliminate the sticker right after drilling a hole for wiring.
Step two:
Get rid of each sides of the lock’s addresses A and pull out the B.(You should refer to Fig.2- Fig.four)
Use screws to screw the entire body lock tight on the appropriate place. Place all covers back in buy.

Action 3:
Get rid of the upper protect (C) of the manage and then the reduced include(C-one) by getting rid of two screws (A-1  B-one) to pull out plate(D).(Make sure you refer to Fig5-Fig6)
Stage four:
Use two connected screws to screw the handle on to the proper situation of the set up holes when D is pulled out.(You should refer to Fig seven) Do not screw tight as to modify the two take care of and body lock positions properly by closing the doorway for a number of instances to make positive equally of them are matched. JCPT the remaining a few screws when they are matched.

Step five:
Slide plate(P) in when positioning and modifying screws are tighten. Assemble the deal with and its body’s again in order.

Installation diagram

Optional plate
Optional EL-250P plate (thickness of 3.6mm) is obtainable to accomplish optimum peak of the two door frame and doorway leaf when the device is installed.

Dimensions

 

Door Handle Magnetic Lock

Tags:

locking collar

As one of leading locking collar manufacturers, suppliers and exporters of products, We offer locking collar and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of locking collar

Recent Posts