Lock Bottom Folder Glue Gluing Machine for Corrugated Cardboard

Lock Bottom Folder Glue Gluing Machine for Corrugated Cardboard

1450-Straight line- double aspect-lock-base-4-6corner purpose
       Folding Gluing Machine      

one.Driving by synchronous belt,make certain sleek and correct managing.
two.Inverter driving,steady and electricity saving.
3.Use electric adjust,simple operate.
4.JCPTmatic continuous feeding,use numerous belt with vibrating motor,(for greater configuration use drilled suction belt),to hold the feeding stable.
five.JCPTmatic counting and kicking,amount can preset.
6.Conveyer strain adjustable according to the box to guarantee greatest quality.
two. Major specialized parameter:

Design ZH-M1450 four/6
Suited material AB/BE/A/B/C/E/F flute  , Card board210-850gsm
Max approach JCPTmatic constant feeding
Max mechanical speed 300m/min
General dimension 19700*2300*1650mm
Excess weight 13.5T
Electrical power consumption 27.2KW,380V,50HZ
Compressed air six bar,ten m³/h,sixty L

 Machine configuration

Main motor GPG
PLC Siemens
Inverter Siemens
Contact display screen Siemens
Driving JCPT  NSK
Basic belt NITTA Japan
Lower voltage equipment Schneider( Relays, contactor,breaker,Button)
Photo Change Panasonic
Wall thickness 20m (right side,left facet) tempered
Gluing technique KQ CHINA
Servo motor Delta (ZheJiang ) for back fold
Servo motor VEICHI China (management the folding segment belt)one more company with no it


one.Feeder Part
·Friction feeder. Independently pushed by inverter.
  Adjustable electronic pile vibrator.
·Lateral feed gates entirely adjustable to the width of the blank.

two.Paper Alignment Technique:  
Impartial area that registers the blank to 1 facet making sure a excellent parallelism ahead of entering the pre-folding or gluing sections.
  Independently pushed by motor.
  Possibility to register on any side of the machine.
  Fast and simple set up.Configuration reducer, various containers when the conversion, the reducer with electric powered regulation

3.Pre-fold Section:

  The pre-fold segment has the benefit to make the box much more simple and effortless to open,even in some situation the scoring is not very nicely.
  Left hand glue flap pre-folder up to 180º.
  3rd crease pre-folding established up to 135º.
  1st and 3rd crease openers.
  Configuration reducer, different containers when the conversion, the reducer with electrical regulation

4.Bottom Lock Segment
  Lock-bottom assembly system with higher elastic hookers is of offer design and style,fast and simple procedure.
·Independently pushed by motor.
  Complete established of folding hooks and helixes for smooth and precise folding of front flaps
  Adjustable hook stress.
  Fast and easy set up
  Configuration reducer, different packing containers when the conversion, the reducer with electric powered regulation.

5.Down Gluing area
·Two reduce (still left and proper) gluing tanks.
·Easy to remove and clean.

6.Folding Section
  Independently driven by motor.
  JCPT and correct folding of 2nd and 4th creases.
  Outer folding belts adjustable up to 180º with variable pace managed by inverter
  Easy accessibility.
  Configure the servo motor to change the belt velocity,Make the box more neat

7.Trombone  Section
·Independently driven by motor.
·Upper and decrease drive system for length adjustment.
·Allows a perfect understack or overstack stream of boxes.
·Equipped with computerized belt rigidity-adjusting technique.
·Continuous and automated box collection mechanism that ensures a neat transfer to the Press segment, guaranteeing an aligned stream.

eight.Press Segment
·Independently motorized pneumatic push section.
·Upper area moves again and ahead by means of a motorized method, allowing different box size.
·Pneumatic strain regulation.

9.Back-folding unit

·Motorized and untimed electronic again folding program with intelligent servo-motor technologies.
·Two independent servo motors, a single for every single shaft.
·Versatile and effortless to set up.

Gluing program
1. Main complex parameter:
Model                                                HZ4

Enter voltage AC220V (±20%)50-60HZ  
Electricity 480W
Glue-like precision ±1mm
Gel-point four sorts
Design HB6
Guns three
To adhesives max viscosity 3000mPas
Every two-way transport efficiency 6:1
Gas resource enter specifications 2-8bar
Weight 25kg
Dimension 1280*480*600mm

Plasma Surface Treatment
Principal technical parameter:

Design Cleanse-PL-5571  
Enter voltage AC220V
Nominal power 1500AV
Plasma electricity supply frequency 20-30khz
Air source stress 60L/m³
Dimension 720*970*1270
Outlet angle <20mm
  two guns
Excess weight 95kg



Lock Bottom Folder Glue Gluing Machine for Corrugated Cardboard


locking collar

As one of leading locking collar manufacturers, suppliers and exporters of products, We offer locking collar and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of locking collar

Recent Posts