Locker Combination Lock, Staff Locker Combination Lock, Steel File Cabinet Combination Lock, Al-9501

Locker blend lock, personnel locker mixture lock, steel file cabinet mixture lock,AL-9501

Merchandise description:

Notice: it is not straightforward to use in moist spot.

1. Outer diameter of lock entire body: 92* 49mm

two. Effective length of shell: 23.5mm

3. Rotation Angle: ninety levels

four. Lock shell materials: Abdominal muscles

5. Important content: hpb59-1 brass

six. Blade materials: hpb59-one brass

7. Surface coloration: gray

eight. Packing quantity: 100 parts

9. Least buy: a hundred sets (1% of the standard essential

10. Tailpiece can be JCPTized according to JCPTer needs

13. The crucial can be increased or decreased as necessary, and the expense is calculated separately

Scope of software: storage cupboards, storage cabinets, storage cabinets, all types of filing cupboards, locker, and so forth. 

Now 9501 has been upgraded to 9501S, make sure you consult JCPTer provider just before capturing

The electronic specification of 9501S is as follows:

1. Battery installation:

Remember to use the crucial to unlock the lock for the first time. Soon after the crucial is inserted, rotate 90 levels clockwise to unlock the lock.Right after unlocking, you should install two no.7 batteries (alkaline batteries are suggested) in the battery compartment on the back of the lock human body, then lock the cupboard, eliminate the essential and hold it appropriately.

2. Established password (the user password is established in the identical way as the administrative password) :

Factory password: consumer password is “one”Management password is “six”

The password is produced up of 1-12 digits and can be saved for a extended time right after electrical power failure.

First password placing: press one (observe: 1 is the manufacturing facility password) → push C → enter new password (illustration: 123456) → press Alright, and the new password will get impact after hearing the prolonged tone (di ~).

Modify password strategy: enter the outdated password → press C important → enter the new password → press Okay essential → the new password requires influence

3, unlock: right after entering the password, push Okay and turn the knob to unlock

Enter the password established on the keyboard. Each push will be prompted by seem and light, indicating that the input is valid. Push Ok following the enter.If the password is right, the inexperienced indicator mild will be on and there will be a prolonged seem (di ~) prompt. At this time, you can turn the knob clockwise to unlock the lock.If the knob is not turned in the course of the opening, the mix lock will automatically reset the lock.If the password is not proper, there will be a double tone (tick) prompt, indicating that the enter mistake, please re-enter the correct password.

four. Lock:

Switch the knob counterclockwise to the lock position to lock.

5. JCPTmatic alarm:

If the password entered four occasions in a row is improper, the mixture lock will alarm.The alarm will last for 60 seconds. For the duration of this time period, enter the proper password and push Alright to cancel the alarm.This function helps prevent others from cracking passwords.

six. Power shortage tip:

When the battery is minimal, it will beep a few times when opening the lock, and the red light-weight is on.The lock can be unlocked about 100 times when the battery is fatigued. Remember to change the battery as before long as achievable.

seven. Emergency lock opening:

Because of to inadequate electrical power, it is not possible to unlock the lock. The crucial can be used to unlock the lock.The crucial is only employed for crisis unlock, and the battery should be changed quickly soon after opening the door.

eight. Crisis decoding:

When the user unintentionally overlook the password, can first use the crucial emergency unlock.

one) following opening the lock, push the obvious code key on the back of the lock, and after hearing the prolonged tone (di ~), the user’s password will be restored to the factory password.

2) right after opening the lock, long press the distinct code essential on the back again of the lock for 5 seconds. Right after hearing the long tone (di ~) 2 times, the management password will be restored to the factory password.


Locker Combination Lock, Staff Locker Combination Lock, Steel File Cabinet Combination Lock, Al-9501