JCPTrkable electrical medical center bed with five functions for pediatric adults

Specification: 
Model: SH-D04-5
Again part up and down: ≥70°
Leg section up and down: ≥40°
Hi-lo adjustable: 560-850mm
Trendelenburg/ reverse trendelenburg: ≥10°
Aspect tilt angle: ≥13°
Max loading weight: 200kg
Dimension: 2140x1100x440-750mm
Bodyweight: 135kg

Purpose: 
one. Back again Segment Up & Down
two. Leg Part Up & Down
three. Hello-Lo adjustment
four. Trendelenburg and reverse trendelenburg
five. Guide CPR Operate
6. 1-important chair
seven. One-crucial laying
eight. A single-key trendelenburg
9. One-important off bed

Optional configuration
Mattress
More than bed table
oddment shelf

Main Elements:
1. Abdominal muscles Aspect Rails: The 4pcs PP facet rails with operating button not only give the client with security against falls but also user can operate body place in accordance to users need.
two. Very best back again Platform board: it can do X-ray imaging offered, so user can do X-ray without changing the mattress.
4. Protective corner bumpers
five. Lifting pole or infusion stand holes
six. Mattress holders
seven. Angle Indicator: The angle gauges of side rails in the head and foot direction show the angles of the backrest and the tilt of the whole bed mattress system respectively.
eight. Extension of the bed: The integrated mattress extension adjusts the mattress platform duration to the specific patient’s peak.
9. 4 125mm castors with central locking method
10. Handbook CPR: The electric powered CPR is outfitted with damping device, which can allow the again relaxation drop down slowly and gradually to make certain the safety of the affected person when the electricity is off, the whole approach can be one hand procedure.
11. LED Delicate light

Bundle:
Common configuration
1 pair of head & foot board
Abs bed platform
two pairs of Stomach muscles aspect rails with damping device
four pcs Linear Actuators
four pcs Dia.125mm castors with central locking
4 pcs Drainage hook
Backup battery optional
UPS(24v)

Material:
one. The bed higher adopts a 40×80 sq. tube with a thickness of 1.2mm, and four drainage hooks are extra on each sides of the bed higher, which can spot several drainage bags at the same time. The mattress floor adopts a stamped panel with a thickness of 1.2mm. The mattress connecting parts are all manufactured of thick-walled pipes previously mentioned 2.75mm or 3mm chilly plate stamping.
2. Welding approach
The robot is employed for flat and full welding, the welding is company, and the welding area is clean and resilient.
3. Bed spraying approach:
The area of the bed physique is produced by electrostatic spraying following sandblasting with steel photographs to remove rust. The bed physique is coated with antistatic powder, which is resistant to acid and alkali corrosion and fading.