Z12 Rck11 Klee RF19 Tlk 451 Keyless Shaft Bonfix Locking Device Shrink Disc Locking Device Locking Assembly

Ubet Keyless Locking Assembly KLD-two
Medium torque, self-centering, modest cross area, machining tolerance shaft H8, hub H8 Socket head locking screw DIN912-12.nine
Self-centering with excellent concentricity the small outer diameter is area-preserving and appropriate for little wheel diameters the spacer ring among the outer flange and the hub maintains the fitting place in the axial direction to enable exact positioning without having a shaft collar the drive-off threads in the outer flanges are employed for dismantling.
 
KLD-2 Interchange with Z11,BIKON 8000,BEA BK80,BONFIX CCE1000,Problem 02,Chiaravalli RCK80,CONEX  B,7110 ECOLOC, JCPTk FLK110,GERWAH PSV2571.one,ITALBLOCK CN55,KTR250,KINLOK LOK10,KBS80,MAV 5061,POGGI CAL-B,RFN7110,Ringspann RLK110,Ringblok 1100,SIT 3,SATI KLCC,TOLLOK TLK110,Tsubaki TF,V-Blok VB800B,Walther Flender MLC3000,Fenner Generate B-Loc B800,LoveJoy SLD1900,SKF FX20,OKBS80,DRIVELOCK80
 
Ubet Locking Aspects KLD-three
Low torque, Medium surface area stress, Taper rings only, Lower axial and radial proportions
This clamping established is self-centering with outstanding concentricity. The very modest outer diameter is place-conserving and appropriate for little wheel diameters. The spacer ring among the outer flange and the hub maintains the fitting place in the axial route to allow actual positioning without having a shaft collar. The drive-off threads in the outer flanges are utilised for dismantling.
 
KLD-3 Interchange with Z1,BIKON 5000,BEA BK50,BONFIX CCE3000,Obstacle 03 Chiaravalli RCK50,CONEX  C,JCPTk FLK300,ITALBLOCK CN31,KRT150,KINLOK LOK80,KBS50,KANA three hundred,MAV 3003,POGGI CAL-C,RFN8006,Ringspann RLK300,Ringblok 1060,SIT two,SATI KLNN,TOLLOK TLK300,Tsubaki EL, ,Walther Flender MLC 2000,Fenner Travel B-Loc B112,LoveJoy SLD350,SKF FX30,OKBS50,DRIVELOCK50
 
Ubet Mechanical Locking System KLD-4
Higher torque, self-centering, medium surface area pressure, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.nine
 
KLD-4 Interchange with Z3,BIKON 7000A,BEA BK70,BONFIX CCE4000,Obstacle 04,Chiaravalli RCK70,CONEX  D,7004 ECOLOC, JCPTk FLK130,GERWAH PSV2007,ITALBLOCK CN54/N,KTR200,KINLOK LOK20A,KBS70,MAV 6901,POGGI CAL-D,RFN7013.,Ringspann RLK130,Ringblok 1300.one,SIT 5A,SATI KLDA,TOLLOK TLK130,V-Blok VK700,SKF FX40,OKBS70,DRIVELOCK70
 
Ubet Shaft Hub Connection KLD-5
Medium torque, reduced size, medium self-centering, Large floor stress, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.9
Suited for slim, disk-shaped wheel hubs. Self-centering and self-locking in the clamping condition.
 
KLD-5 Interchange with Z3B,BIKON 1003,BEA BK13,BONFIX CCE4100,Challenge 05,Chiaravalli RCK13,CONEX  DS,7003 ECOLOC, JCPTk FLK132,GERWAH PSV2006,KTR203,KBS13,KANA 201,MAV 1062,POGGI CAL-DS,RFN7013., Ringspann RLK132,Ringblok 1710,SIT six,SATI KLAA,TOLLOK TLK132,TAS3003,       V-Blok VK160,Walther Flender MLC 5006,LoveJoy SLD1750,SKF FX41, OKBS13, DRIVELOCK13.
 
Ubet Shaft Locking Gadget KLD-6
Medium torque, self-centering, Low surface pressure, No axial hub movement, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
 
KLD-six Interchange with Z13,BIKON 7000B,BEA BK71,BONFIX CCE4500,Problem 06,Chiaravalli RCK71,CONEX  E,7007 ECOLOC, JCPTk FLK131,GERWAH PSV2007.3,ITALBLOCK CN54/S,KTR201,KINLOK LOK20B,KBS71,MAV 6902,POGGI CAL-E,RFN7013.one,Ringspann RLK131,Ringblok 1300.two,SIT 5B,SATI KLDB,TOLLOK TLK131,Tsubaki KE,V-Blok VK700.one,Walther Flender MLC5000B,SKF FX50,OKBS71,DRIVELOCK71
 
Ubet Clamping Electricity Lock KLD-seven
Medium torque, reduced duration, High surface area strain, No axial hub motion, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine Simultaneous Link of Chain Sprocket
 
KLD-seven Interchange with Z8,BIKON 1006,BEA BK16,BONFIX CCE4600,Problem 07,Chiaravalli RCK16,CONEX  ES,7006 ECOLOC,JCPTk FLK133,GERWAH PSV2006.3,ITALBLOCK CN9/4,KTR206,KBS16,KANA 201,MAV 1061,POGGI CAL-ES,RFN7013.1,Ringspann RLK133,Ringblok 1720,SATI KLAB,TOLLOK TLK133,Tsubaki AE,TAS3006,V-Blok VK130,Walther Flender MLC 5007,LoveJoy SLD1750,SKF FX51,OKBS16,DRIVELOCK16
 
Ubet Shrink Disc KLD-14
Large torque, No axial hub motion, Higher pace application, desired answer for coupling hub and hollow shaft gearbox, DIN931-10.nine screw Intelligent-Lock Shrink Disc, Slender Hub Link for sprockets, connect hollow and strong shafts frictionally and backlash-free of charge.
 
KLD-14 Interchange with Z7B,BEA BK19,BONFIX CCE8000,Problem 14,Chiaravalli RCK19,CONEX  SD, JCPTk FLK603, ,KTR603,KBS19,MAV 2008,RFN4071,Ringspann RLK603,Ringblok 2200,SATI KLDD,TOLLOK TLK603, Tsubaki SL, ,Walther Flender MLC 9050,Fenner Generate B-Loc SD10,LoveJoy SLD900,SKF FX190,OKBS19,DRIVELOCK19
 
Ubet Locking Assembly KLD-fifteen
Substantial torque, self-centering, Minimal-medium area strain, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.9
 
KLD-fifteen Interchange with BEA BK15, Obstacle 15,Chiaravalli RCK15,CONEX  EP, JCPTk FLK134,KBS15 ,MAV 3061,Ringspann RLK134,SATI KLBB,TOLLOK TLK134, ,SKF FX52,DRIVELOCK15
 
 
Ubet Locking Bushes KLD-16
Medium torque, Diminished length, Medium self-centering, Substantial surface stress, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
 
KLD-16 Interchange with BONFIX CCE4900,Problem sixteen,CONEX  L,KTR225,KBS52,SATI KLHH,,SKF FX120
 
 
Ubet Ball JCPT Adapter Sleeve KLD-17
Lower torque, Limited Size, Not self-centering, Reduced area force, machining tolerance shaft H8, hub H8
 
KLD-seventeen Interchange with BEA BK25, Problem seventeen, KBS51, SATI KLFC,,SKF FX80
 
Ubet JCPT Adapter Sleeve  KLD-seventeen.one
Minimal-medium torque, self-centering, minimal area stress, machining tolerance shaft H8, hub H8
 
KLD-17.1 Interchange with Z19B, BEA BK26,Obstacle 21,Chiaravalli RCK55, JCPTk FLK250,KTR125,KBS55, POGGI CAL-L,Ringspann RLK250,Ringblok 1500, SATI KLFF,TOLLOK TLK250
 
Ubet Shaft Clamping Collar KLD-18
Low-medium torque, Limited Size, self-centering, low surface area pressure, machining tolerance shaft H8, hub H8, socket head Locking screw DIN912-twelve.9
This clamping established is self-centering and appropriate for really tiny shaft diameters.     It transfers typical to huge torques
 
KLD-seventeen.one Interchange with BEA BK61,Chiaravalli RCK61,7002 ECOLOC ,GERWAH PSV2061,KTR105,KBS61,MAV 7903,SATI KLSS, Walther Flender MLC 5050,SKF FX350,OKBS61,DRIVELOCK61
 
Ubet Clamping System KLD-19
quite higher torque, self-centering, medium surface area strain, no axial hub motion, machining tolerance shaft H8, hub H8,  socket head Locking screw DIN912-12.nine
This clamping established is self-centering with outstanding concentricity. The incredibly modest outer diameter is area-conserving and appropriate for small wheel diameters. The spacer ring between the outer flange and the hub maintains the fitting placement in the axial course to empower actual positioning with no a shaft collar.
 
KLD-19 Interchange with Z12A,BIKON 1012,BEA BK11,BONFIX CCE9500,Problem 19,Chiaravalli RCK11,CONEX  F,7005 ECOLOC,JCPTk FLK400,GERWAH PSV2005,ITALBLOCK CN911,KTR400,KINLOK LOK40,KBS11,MAV 4061,POGGI CAL-F,RFN7015,Ringspann RLK400,Ringblok 1800,SIT four,SATI KLEE,TOLLOK TLK400,Tsubaki Advertisement,TAS3012,V-Blok VK112,Walther Flender MLC 4000/MLC 7000,Fenner Drive B-Loc B112,LoveJoy SLD2600,SKF FX60,OKBS11,DRIVELOCK11
 
Ubet Clamping Unit  KLD-33 interchange with Z4, RFN7014
 
Ubet Locking Device KLD-34 interchange with  Z5,BIKON 1015./1015.one, 7009 ECOLOC,JCPTk ,GERWAH PSV2009, KTR401,MAV 1008,RFN7015.,Ringspann RLK401,Ringblok 1810,TOLLOK TLK451,TAS3015./3015.one,

Keyless Locking Devices are also contact as below 
one.     Welle-Nabe-Verbindungen
two.     Wellenspannsaetze,
three.     Spannsaetze, 
four.     Taper Spannbuchsen,
five.     Taper Lock, 
six.     Keyless Locking System,
7.     Keyless Locking  Assembly,
eight.     Keyless Shaft Locking Unit,
9.     Keyless Shaft Hub Locking Unit,
ten.  Keyless Bushings,
11.  Keyless Shaft Hub Relationship,
twelve.  Clamping Sleeve,
13.  Clamping Element,
14.  Clamping Collar,
fifteen.  Clamping Bush,
sixteen.  Clamping Gadgets,
17.  Clamping Established,
18.  Clamping Electrical power Lock,
19.  Cone Clamping Element,
twenty.  Shaft Clamping,
21.  Shaft Fixing,
22.  Shaft Fixing Cone Clamping Component, 
23.  Conical clamping rings, 
24.  Shaft Lock Clamping Aspect,
25.  Shaft Clamping Element,
26.  Shaft Clamping Collar,
27.  Shaft Locking Unit,
28.  Shaft Hub Connection,
29.  Shaft Hub Locking Unit,
thirty.  Shaft Hub Locking Assembly,
31.  Shaft Lock,
32.  Silted Clamping Component,
33.  Shaftlock Clamping Component,
34.  Locking Assembly,
35.  Locking Bushes,
36.  Locking Rings,
37.  Rigid Shaft Coupling,
38.  Rigid Shaft Coupler,
39.  Rigid Ring Block,
40.  Ring Shaft Lock, 
forty one.  Ringblock Locking Assemblies,
forty two.  Gear Wheel Link,
forty three.  Zinc Plated Locking Gadgets, 
forty four.  Nickel Plated Locking Assembly,
45.  Mechanical Locking Unit, 
forty six.  Mechanical shaft lock,
forty seven.  Schrumpfscheibe,
forty eight.   Exterior Locking Assembly,
49.  Narrow Hub Connection for Sprockets,
fifty.  Shrink Disc, 
51.  Brake Disc, 
52.  Shrink Disk,
53.  External Locking Assembly JCPT Responsibility, 
54.  Shrink Discs Normal Duty, 
55.  Shrink Disks JCPT Duty, 
56.  Smart-Lock Schrumpfscheibe, 
fifty seven.  Smart-Lock Shrink Disc, 
58.  JCPT Adapter Sleeve, 
59.  Lock Nut,
60.  POWER NUT, 
sixty one.  POWER Url, 
sixty two.  Shaft Self-Lock Ring Nut, 
63.  Nickel Plated Locking Devices,  
sixty four.  Zinc Plated Locking gadgets, 
sixty five.  Stainless Steel Locking Devices.

Ubet JCPT is also competetive on these power transmission factors.

Clamp electrical power lock, Energy Lock, Locking Assembly, Locking system is a keyless shaft-hub locking products for connecting hubs and shaft with substantial torque transmission, are linker used between shafts and pulley, which can change the solitary important and spline.
They can transmit torque by means of a established of tightening screw with higher strength, which can make the necessary clamping power in between the interior rings and shaft, also between the outer ring and hub. It is effortless assmebling and diassembling.
They have a great interchangeablity. The screw are with high toughness.
Electrical power lock have several item
We generate by CNC device
Their major content is exceptional steel.
After machining, they will have clean and beautiful surface, have long daily life time and high toughness.

1. International normal Energy Lock
two. Most popular on European marketplace
three. Steel 42CrMo4 / 4140 C45E / 1045
We are a major maker of Electrical power Lock in China. More than sixty five% of our goods are exported to West Europe and twenty% to North The us. We ensure exceptional good quality merchandise with aggressive price in China.
Our Electrical power Lock are interchangeable to:
Ringfeder, Tollok, Chiaravalli, Sati, Obstacle, Bonfix, Compomac, V-Blok, Ringblok, Kana, KTR
GB STHangJCPTRD: Z1, Z2, Z3, Z3 For a longer time, Z4, Z5, Z6, Z7B, Z8, Z11, Z12A, Z13, Z14, Z19A, Z19B
RINGFEDER GERMANY STHangJCPTRD: RFN4071, RFN7012, RFN7013, RFN7110, RFN8006
TSUBAKI JAPAN STHangJCPTRD: AS, TF, EL, SL, Ad
CHIARAVALLI ITALY STHangJCPTRD: RCK11, RCK13, RCK15, RCK16, RCK19, RCK40, RCK45, RCK50, RCK55, RCK70, RCK71, RCK80, RCK95
TOLLOK ITALY STHangJCPTRD: TLK110, TLK130, TLK131, TLK132, TLK133, TLK134, TLK200, TLK300, TLK400, TLK603
RINGSPANN GERMANY STHangJCPTRD: RLK130, RLK132, RLK133, RLK200
BIKON GERMANY STHangJCPTRD: 1003, 1006, 1012, 4000, 5000, 7000A, 7000B, 8000
BONFIX STHangJCPTRD: CCE1000, CCE2000, CCE3000, CCE4000, CCE4100, CCE4500, CCE4600, CCE4900, CCE8000, CCE9500
SATI STHangJCPTRD: KLGG, KLCC, KLNN, KLDA, KLAA, KLDB, KLAB, KLPP, KLBB, KLHH, KLEE, KLFF, KLMM
COMPOMAC STHangJCPTRD: A, B, C, D, ES/DS, EP, SD, F
VBLOK STHangJCPTRD: VK400, VK800B, VK700, VK160, VK700.1, VK130, VK112
RINGBLOK STHangJCPTRD: 1060, 1100, 1120, 1710, 1720, 1800
KANA STHangJCPTRD: two hundred, 201, three hundred
KTR STHangJCPTRD: KTR100, KTR150, KTR200, KTR201, KTR203, KTR206, KTR225, KTR250, KTR400, KTR603
Function
1. Easy to set up and dismantle.
2. Higher diploma of overall flexibility
3. Extended life span and high successful transmitting
four. Lower notching result
5. Safety of the pricey products under in excess of load running.
6. In compliance with quality requirement of designed coutries.
7. Tremendous large good quality with least expensive cost.
Clamp electricity lock, keyless locking gadget, locking system, shaft locking assemblies, keyless shaft locking unit, keyless shaft-hub locking unit, lock system

 

Z12 Rck11 Klee RF19 Tlk 451 Keyless Shaft Bonfix Locking Device Shrink Disc Locking Device Locking Assembly