780-lock base-double facet-straight line
Folding Gluing Device
one.Driving by synchronous belt,make sure easy and accurate operating.
2.Inverter driving,secure and power saving.
three.Use electric powered modify,effortless function.
four.JCPTmatic ongoing feeding,use multiple belt with vibrating motor to hold the feeding stable.
5.JCPTmatic counting and kicking,quantity can preset.
six.Conveyer stress adjustable in accordance to the box to guarantee ideal top quality.
two. Major complex parameter:
|Ideal substance||Card board 210-800gsm/E flute|
|Max method||JCPTmatic continuous feeding|
|Max mechanical velocity||350m/min|
|All round dimension||14000*1500*1400mm|
|Electricity usage||11.8KW, 380V, 50HZ|
|Compressed air||six bar,10 m³/h,sixty L|
|Contact display screen||Siemens|
|Wall thickness||Double side 20mm tempered|
|Simple belt||NITTA Japan|
|Change energy source||Schneider|
With unbiased transmission,lower noise,with entrance adjustable wheels,max doing work capacity can be accomplished.
Feeding knives and left and right registers correcting bar are controlled up and down by pneumatic system simply.
Feeding knifes are equipped with pneumatic system for smoother feeding.
Configure the screen, real-time checking of the paper is standard.
2.Paper Alignment Method:
JCPTmatic alignment method to right the paper feeding,avoiding the paper likely to sides.
Configure the transmission to adjust the belt pace,Make the box far more neat.
The pre-fold segment has the edge to make the box far more plain and effortless to open up,even in some circumstance the scoring is not quite well.
• Still left hand glue flap pre-folder up to 180º.
• 3rd crease pre-folding set up to 135º.
• 1st and third crease openers.
Configuration reducer, various bins when the conversion, the reducer with electrical regulation
4.Base Lock Part
Huge-quantity layout,when the device is running at large speed,the glue will not go out or leaking .Optional
bottle is good for extended time operation.
Lock-base assembly mechanism with higher elastic hookers is of deal layout,quick and effortless procedure.
Configuration reducer, various packing containers when the conversion, the reducer with electrical regulation
5.Down gluing part
Two aspect gluing tank.(right and still left)
Effortless to take away and clear
Equipped with speed variator for belts,ensure the folded boxes parallel and in good order
Quick,convenient adjustment and operation can fold boxes perfectly
The middle up and down transmission module can fold boxes synchronously or alternately
Configuration reducer, various packing containers when the conversion, the reducer with electric regulation.
• Steady and computerized box selection mechanism that guarantees a neat transfer to the Push section, guaranteeing a wellaligned flow.
Configure the Siemens touch display screen laptop pace can be altered
• Handbook and automated velocity variation in coordination with a photocell.
1. Primary technical parameter:
|Enter voltage||AC220V (±20%)fifty-60HZ|
|To adhesives max viscosity||3000mPas|
|Every two-way transport effectiveness||6:one|
|Gas resource enter requirements||2-8bar|
Plasma Surface area Treatment method
Primary technological parameter:
|Nominal electrical power||1500AV|
|Plasma power offer frequency||20-30khz|
|Air supply strain||60L/m³|