1450-Straight line- double aspect-lock-base-four-6corner operate
Folding Gluing Machine
one.Driving by synchronous belt,guarantee smooth and precise operating.
2.Inverter driving,steady and power saving.
three.Use electric powered modify,easy run.
4.JCPTmatic steady feeding,use several belt with vibrating motor,(for increased configuration use drilled suction belt),to maintain the feeding steady.
5.JCPTmatic counting and kicking,amount can preset.
six.Conveyer strain adjustable according to the box to make sure very best quality.
two. Primary technological parameter:
|Suited content||Card board210-850gsm , A/B/C/E/F flute corrugated board|
|Max approach||JCPTmatic constant feeding|
|Max mechanical speed||300m/min|
|Electrical power intake||21.5 KW,380V,50HZ|
|Compressed air||6 bar,ten m³/h,sixty L|
Standard & Optional configuration list
|2||Paper Alignment Section||√|
|four||Crash lock base section||√|
|five||Higher paste barrel equipment||√|
|six||Down pasting products||√|
|nine||Plasma treatment program|
|10||Folding and closing part||√|
·Friction feeder. Independently pushed by inverter.
Adjustable electronic pile vibrator.
·Lateral feed gates entirely adjustable to the width of the blank.
two.Paper Alignment Technique:
Impartial section that registers the blank to one aspect making sure a excellent parallelism prior to getting into the pre-folding or gluing sections.
Independently pushed by motor.
Possibility to sign up on any facet of the machine.
Fast and effortless set up.Configuration reducer, different containers when the conversion, the reducer with electric powered regulation
The pre-fold part has the gain to make the box a lot more basic and simple to open up,even in some circumstance the scoring is not really effectively.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding established up to 135º.
1st and third crease openers.
Configuration reducer, diverse containers when the conversion, the reducer with electric powered regulation
four.Bottom Lock Segment
Lock-bottom assembly mechanism with higher elastic hookers is of deal style,rapidly and effortless procedure.
·Independently driven by motor.
Complete established of folding hooks and helixes for smooth and accurate folding of entrance flaps
Adjustable hook pressure.
Fast and effortless setup
Configuration reducer, various packing containers when the conversion, the reducer with electrical regulation.
5.Down Gluing part
·Two reduced (remaining and proper) gluing tanks.
·Easy to eliminate and clean.
Independently pushed by motor.
JCPT and correct folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable velocity controlled by inverter
Configure the servo motor to modify the belt pace,Make the box far more neat
·Independently pushed by motor.
·Upper and lower generate mechanism for length adjustment.
·Allows a ideal understack or overstack stream of boxes.
·Equipped with automatic belt rigidity-changing method.
·Continuous and automated box collection system that assures a neat transfer to the Push area, guaranteeing an aligned movement.
·Independently motorized pneumatic press section.
·Upper section moves again and forward through a motorized method, enabling various box size.
·Pneumatic stress regulation.
one. Primary specialized parameter:
|Input voltage||AC220V (±20%)50-60HZ|
|To adhesives max viscosity||3000mPas|
|Each two-way transport effectiveness||six:one|
|Fuel supply enter demands||2-8bar|
Plasma Surface area Treatment method
Principal technical parameter:
|Plasma power source frequency||twenty-30khz|
|Air offer force||60L/m³|