1450-Straight line- double side-lock-base-4-6corner function
Folding Gluing Machine
1.Driving by synchronous belt,make certain smooth and precise running.
2.Inverter driving,steady and energy conserving.
three.Use electric powered change,effortless function.
4.JCPTmatic continuous feeding,use a number of belt with vibrating motor,(for higher configuration use drilled suction belt),to preserve the feeding stable.
5.JCPTmatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to make sure ideal good quality.
two. Principal complex parameter:
|Ideal material||Card board210-850gsm , A/B/C/E/F flute corrugated board|
|Max strategy||JCPTmatic steady feeding|
|Max mechanical speed||300m/min|
|Energy consumption||21.5 KW,380V,50HZ|
|Compressed air||six bar,ten m³/h,60 L|
Regular & Optional configuration checklist
|2||Paper Alignment Section||√|
|four||Crash lock base section||√|
|five||Higher paste barrel gear||√|
|six||Down pasting tools||√|
|nine||Plasma therapy technique|
|10||Folding and closing section||√|
·Friction feeder. Independently driven by inverter.
Adjustable electronic pile vibrator.
·Lateral feed gates completely adjustable to the width of the blank.
2.Paper Alignment Technique:
Impartial segment that registers the blank to 1 aspect guaranteeing a best parallelism prior to moving into the pre-folding or gluing sections.
Independently pushed by motor.
Possibility to register on any aspect of the equipment.
Fast and straightforward setup.Configuration reducer, various bins when the conversion, the reducer with electrical regulation
The pre-fold segment has the advantage to make the box more plain and effortless to open up,even in some scenario the scoring is not extremely properly.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding established up to 135º.
1st and third crease openers.
Configuration reducer, diverse packing containers when the conversion, the reducer with electrical regulation
four.Base Lock Part
Lock-bottom assembly system with high elastic hookers is of offer style,quickly and easy operation.
·Independently driven by motor.
Complete set of folding hooks and helixes for clean and correct folding of entrance flaps
Adjustable hook stress.
Fast and easy setup
Configuration reducer, different containers when the conversion, the reducer with electric regulation.
five.Down Gluing segment
·Two reduce (still left and proper) gluing tanks.
·Easy to get rid of and thoroughly clean.
Independently driven by motor.
JCPT and precise folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable pace managed by inverter
Configure the servo motor to modify the belt speed,Make the box more neat
·Independently pushed by motor.
·Upper and decrease travel system for duration adjustment.
·Allows a perfect understack or overstack stream of packing containers.
·Equipped with automated belt tension-changing system.
·Continuous and automated box collection system that assures a neat transfer to the Push part, guaranteeing an aligned movement.
·Independently motorized pneumatic press area.
·Upper area moves back again and ahead by way of a motorized system, permitting various box duration.
·Pneumatic strain regulation.
1. Main technical parameter:
|Input voltage||AC220V (±20%)50-60HZ|
|To adhesives max viscosity||3000mPas|
|Each two-way transport efficiency||six:one|
|Gasoline supply enter needs||2-8bar|
Plasma Floor Treatment
Main specialized parameter:
|Nominal electrical power||1500AV|
|Plasma power offer frequency||twenty-30khz|
|Air source stress||60L/m³|