Item description:

Product JCPT CNC hose crimping machine has equipped with pc numerical management program, quick crimp and good quality. This machine functions higher crimp precision, large pressure, lower sounds and easy to work. It can make the mould foundation division to be much more even by way of the double inclined plane 8-flap mould seat outfitted with a large accuracy guiding device. JCPT CNC hose crimping device is mostly utilized for crimping processing for substantial strain hydraulic hose assembly in the mechanical engineering. It can also be utilised for crimping steel pipes, specifically large pipes and irregular form pipes.This device characteristics small and portable look, huge force, reduced sounds and simple to work. The buckling sum can be exact adjusted via a scale. It helps make the mould base division to be far more even through the double inclined airplane eight-flap mould seat equipped with a higher precision guiding gadget.

Installation and Procedure
one. Add sufficiently 70 liters of Wonderful Wall brand 46# anti-abrasion hydraulic oil. If the area temperature is reduce than 10ºC, ten% transformer oil is want to include.
Connect the electric powered resource well as for every the machine specifications, to make the direction of the motor rotation to be constant with the rotation path marking, and grounding protection shall be accomplished.
two. Regulating the scale
The scale is utilized for regulating the sum of the buckling. When it is controlled clockwise, the buckling sum will decrease, when it is regulated anticlockwise, the buckling amount will enhance. The scale is connected collectively with oil cylinder finish protect via three socket head screws and three springs on the scale foundation. When employing a hand to pull the scale (vertical to the oil cylinder stop include course), the scale can flexibly leave from the oil cylinder finish include. When releasing the scale, the scale will be recovered JCPTing on spring power. Before the machine is turned on, inspect cautiously if the scale telescoping is adaptable and if the direct relationship is dependable.
three. The main scale is turned in line of the secondary scale, change the device on for examination operate, and notice if all steps are normal. If when the piston conducts reciprocating movement, there is a crawling phenomenon, the bleed screw on the oil cylinder leading shall be unscrewed for exhausting air.
four. Strain regulation
The buckling pressure and opening mould stress will be regulated through two knobs at the again of the oil cylinder (see figure), when it is regulated clockwise, the force will boost, when it is controlled anticlockwise, the pressure will lessen (The strain has currently been nicely regulated when ex-factory).
5. Procedure 
Based mostly on the dimensions of the rubber hose to be buckled, pick suitable mould as per the complex parameter reference desk of the locking pipe and mount it on the mould foundation. Regulated well the scale situation as per the data in the info in the desk, the pipe locking can be accomplished. Following pipe locking, use a vernier caliper to mease the outdoors diameter dimension of the pipe sleeve right after buckling to see if it fulfills the reference table info of the parameter. If it does not meet the data, the scale shall be specifically regulated until it meets the demands. Because the manufactures of the pipe sleeve are diverse, so, specific dimension, material, hardness and many others are undoubtedly not the identical. These factors would result diverse influences on the pipe locking outcome, for that reason, the data in the table is only for reference, the thorough data get the strain examination as the basis.

 Notices

1. When buckling, make the joint to identify the mould center as a lot as attainable, the joint is not buckled on the hex nut.
2. Stop instrument and other international issue from entering the locking head.
3. Following the perform is finished for each and every time, the eight-block mould foundation must be created to lengthen to the best extent, this can make the spring to be at extension position. If not, the spring will be injury.
4. When working, the hand must not extend into the locking head.
5. The energy supply have to be switched off when servicing is accomplished.

Servicing

1. We will give a ensure to maintain the equipment in great restore inside of 3 many years from the working day when the machine is bought. All fitting troubles will be free of charge repaired (or changed if necessary) throughout the promise interval. The hurt resulted from improper use o accident injury does not belong to totally free of cost restore range.
2. The hydraulic oil in the oil tank should be frequently checked, if oil volume is located to be inadequate, the oil shall be timely supplemented. If the oil liquid is polluted, it shall be filtered or changed.
   The locking head shall preserve internal cleanliness. Steer clear of the foreign issues in the course of processing to enter into the locking head oil cylinder via the mould to impact the standard use. Wipe out the overseas issues, which are introduced by the mould body in time when buckling the joint.
   Frequently fill suited grease into the mould human body for lubrication.

Promise
We will provide a ensure to keep the device in excellent restore in three a long time from the day when the device is acquired. All fitting difficulties will be free of charge of charge fixed (or changed if necessary) in the course of the guarantee period. The harm resulted from inappropriate use o accident damage does not belong to totally free of charge mend assortment.

Troubleshooting

Difficulty phenomena	Difficulties reason	Eliminating technique
Device has not action	Oil tank has not been loaded with oil	Fill oil as for every requirement
	Motor rotation route is not correct	Control two period strains
	Electrical difficulty	Overhaul electrical circuits
Scale is destroyed	The scale is fixed on the oil cylinder finish face by the screw	Regulate the scale as per the instruction to make scale to telescope freely
	Conductor at scale spot is linked with scale	Anew join the scale conductor to make it to be insulated from scale foundation
	Electric powered difficulties	Overhaul electric powered circuits and electric factors
	Scale conductor cutting	Anew hook up scale
	Program strain is excessively minimal	Change buckling force-regulating valve
No buckling	The valve main of solenoid reversal valve is seizured by overseas matters	Dismount solenoid reversal valve, use gasoline to cleanse the valve main.
	Electric difficulty	Overhaul electric circuits
Mould is not opened	Opening mould stress is excessively minimal	Adjust opening mould force regulating valve
	Electric powered trouble	Overhaul electrical circuits
Huge noise	Installation is not secure	Carry out horizontal secure set up
	JCPT oil is excessively dirty	Filter or alter it
	Filter is blocked	Use gasoline to clear the filter
Mould base crawls	Gas in the hydraulic oil has not bee exhausted entirely	Suitable unscrew the bleed screw, make the piston in the oil cylinder to shift back to previous place to exhaust gasoline, then screw down bleed screw.
	Lubrication is poor	Smear grease on the working inclined encounter of mould foundation
Oil leakage	Joint is not tightened closely	Tighten the oil pipe joint
	Sealing washer is damaged.	Exchange sealing washer.

Our service:

Pre-Income Provider

* Inquiry and consulting support.
* Sample tests support.
* See our Manufacturing unit & Workplace.
 

Following-Revenue Support

* Guarantee for three years.
* Instruction how to instal and use the machine.
* Give free rapid-use element.
 
Payment Time period:

Trade Assurance

* Shell out to our company’s CITIBANK account selected by Alibaba.com with credit card or bank transfer.
* 100% item quality protection 100% on-time shipment protection 100% payment defense.

T/T

* 100% T/T in advance(normal types in inventory).
* fifty% T/T in progress, JCPT compensated before shipping and delivery(for the JCPTized models).

Our manufacturing unit also have accept the payment by western union,paypal and cash gram.

FAQ:
one.Query:Are you maker or buying and selling company?
Reply:We are company since 1997.

2.Issue:Certificates ?
Response:CE,ISO

3.Query:Supply time?
Answer:The machines arein stock now,can be delivered as you need.

4.Question:What is theMOQ?
Answer:1 set for you take a look at.

five.Question:Can I get some low cost ?
Yes, buddy.The much more you buy, the much more you preserve.

6.Query:What is the payment?
Solution:T/T in progress,as most of our crimping device model are in stock.
L/C,western union,paypal and funds gram also can be approved.

7.Query:Can you make JCPTized patterns or Symbol?
Of training course, we are expert OEM maker.

8.Query:Can I check out your factory?
Sure,you are warmly welcome to go to our manufacturing facility anytime. Before the browsing, remember to get in touch with us to begin with and affirm the browsing time, our car can select up you to our manufacturing facility.
 

Why choose JCPT FJCPTORY?

one.Substantial Quality CE UL ISO approved JCPT hose crimping machine.

two.Wonderful Cost-effective manual hose crimping machine,Very best Quality you at any time have.

three.Samway generate the hose crimping machine up to 800mm diameter hose with 2500 ton urgent pressure.

4.Rapidly shipping and delivery, our manufacturing unit can dispatch the machine inside of 24 hours after get the payment and guarantee to ship nomally 7 operating days on board.

Discounts available with bulk obtain

Braided hose crimper JCPT Up to 2” 6SP R15 JCPT Hose Compact in Measurement Reasonably priced Excellent Device

220V 240V single phase  50/60hz, 380V/400v/415v/440v three section device have stock.

A excellent affordable braided hose crimper will crimp up to 2″ 4SP/4SH hydraulic hose,the machine is equiped with most recent technology,Motor from SIEMENS company control method from SIEMENS,Rexroth hydraulic valves,NOK seal make the machine druable.

Finn power sequence braided hose crimper are mostly for support and little production objective,cost-effective and compact in design and style,best for most of your demands in hose assembly.

Main customers:RYCO,PIRTEK,PARKER United states,CATERPILAR etc.

OEM support:Our manufacturing unit hydraulic hose crimping equipment for sale up to thirty”,crimping variety up to 1000mm obtainable,5000 ton crimping pressure.

Guarantee:Our manufacturing facility hose crimping device supply 3 many years warranty from date of buying.