2020 New Professional Manufacturer Crimped Wire Machine Wire Crimping Machine

Merchandise description:

Design JCPT CNC hose crimping machine has outfitted with laptop numerical manage method, fast crimp and excellent top quality. This equipment functions high crimp accuracy, large power, reduced sounds and effortless to run. It makes the mould foundation division to be much more even by way of the double inclined aircraft eight-flap mould seat outfitted with a large accuracy guiding system. JCPT CNC hose crimping device is mainly utilized for crimping processing for high strain hydraulic hose assembly in the mechanical engineering. It can also be employed for crimping metal pipes, specifically big pipes and irregular condition pipes.This device attributes little and portable physical appearance, big drive, lower sounds and easy to operate. The buckling sum can be precise modified through a scale. It makes the mould foundation division to be far more even by way of the double inclined plane 8-flap mould seat outfitted with a substantial accuracy guiding unit.

Set up and Procedure
1. Add sufficiently 70 liters of Wonderful Wall model forty six# anti-abrasion hydraulic oil. If the room temperature is reduced than 10ºC, ten% transformer oil is require to insert.
Join the electric supply nicely as for every the equipment needs, to make the route of the motor rotation to be steady with the rotation path marking, and grounding safety shall be accomplished.
2. Regulating the scale
The scale is utilised for regulating the sum of the buckling. When it is regulated clockwise, the buckling quantity will decrease, when it is regulated anticlockwise, the buckling sum will improve. The scale is related with each other with oil cylinder stop cover by means of a few socket head screws and three springs on the scale foundation. When utilizing a hand to pull the scale (vertical to the oil cylinder stop cover route), the scale can flexibly leave from the oil cylinder finish include. When releasing the scale, the scale will be recovered JCPTing on spring pressure. Ahead of the machine is turned on, examine meticulously if the scale telescoping is adaptable and if the lead relationship is trustworthy.
three. The primary scale is turned within line of the secondary scale, switch the device on for check operate, and notice if all actions are normal. If when the piston conducts reciprocating movement, there is a crawling phenomenon, the bleed screw on the oil cylinder leading shall be unscrewed for exhausting air.
4. Force regulation
The buckling stress and opening mould pressure will be regulated through two knobs at the again of the oil cylinder (see determine), when it is controlled clockwise, the strain will improve, when it is regulated anticlockwise, the pressure will lower (The force has already been nicely controlled when ex-manufacturing facility).
5. Operation 
Dependent on the dimension of the rubber hose to be buckled, pick ideal mould as for each the technical parameter reference table of the locking pipe and mount it on the mould foundation. Regulated effectively the scale place as for every the info in the information in the desk, the pipe locking can be done. Right after pipe locking, use a vernier caliper to mease the exterior diameter dimension of the pipe sleeve right after buckling to see if it satisfies the reference desk info of the parameter. If it does not meet up with the data, the scale shall be exactly controlled till it satisfies the requirements. Because the manufactures of the pipe sleeve are diverse, so, particular dimension, substance, hardness and many others are surely not the identical. These aspects would result distinct influences on the pipe locking outcome, consequently, the data in the table is only for reference, the detailed info consider the strain examination as the foundation.

 Notices

  1. When buckling, make the joint to find the mould center as much as achievable, the joint is not buckled on the hex nut.
  2. Stop device and other overseas matter from entering the locking head.
  3. Following the work is concluded for each and every time, the eight-block mould base should be produced to increase to the greatest extent, this can make the spring to be at extension standing. If not, the spring will be damage.
  4. When doing work, the hand must not extend into the locking head.
  5. The electrical power provide should be switched off when servicing is carried out.

Maintenance

  1. We will give a promise to hold the machine in very good repair inside of 3 many years from the day when the equipment is purchased. All fitting difficulties will be free of demand repaired (or replaced if necessary) throughout the promise interval. The damage resulted from poor use o accident hurt does not belong to cost-free of charge restore assortment.
  2. The hydraulic oil in the oil tank should be regularly checked, if oil sum is found to be insufficient, the oil shall be timely supplemented. If the oil liquid is polluted, it shall be filtered or changed.
    The locking head shall keep interior cleanliness. Keep away from the international matters throughout processing to enter into the locking head oil cylinder by means of the mould to influence the normal use. Wipe out the overseas issues, which are introduced by the mould body in time when buckling the joint.
    Usually fill ideal grease into the mould human body for lubrication.

Promise
We will supply a guarantee to maintain the equipment in great repair in 3 a long time from the day when the device is bought. All fitting problems will be free of charge of cost repaired (or changed if required) for the duration of the guarantee period of time. The harm resulted from incorrect use o accident injury does not belong to free of charge of demand repair range.

Troubleshooting

Difficulties phenomena Difficulties purpose Removing method
Equipment has not motion Oil tank has not been crammed with oil Fill oil as for each necessity
Motor rotation path is not appropriate Regulate two section traces
Electric powered difficulty Overhaul electrical circuits
Scale is destroyed The scale is mounted on the oil cylinder end face by the screw Control the scale as for every the instruction to make scale to telescope freely
Conductor at scale location is related with scale Anew link the scale conductor to make it to be insulated from scale foundation
Electric problems Overhaul electric powered circuits and electric factors
Scale conductor reducing Anew link scale
Method force is excessively reduced Alter buckling stress-regulating valve
No buckling The valve core of solenoid reversal valve is seizured by international matters Dismount solenoid reversal valve, use gasoline to thoroughly clean the valve core.
Electrical difficulty Overhaul electric circuits
Mould is not opened Opening mould stress is excessively lower Change opening mould pressure regulating valve
Electric powered difficulties Overhaul electric powered circuits
Big noise Set up is not steady Carry out horizontal stable set up
JCPT oil is excessively soiled Filter or adjust it
Filter is blocked Use gasoline to clear the filter
Mould foundation crawls Fuel in the hydraulic oil has not bee exhausted fully Suited unscrew the bleed screw, make the piston in the oil cylinder to transfer again to previous position to exhaust gas, then screw down bleed screw.
Lubrication is very poor Smear grease on the working inclined confront of mould foundation
Oil leakage Joint is not tightened intently Tighten the oil pipe joint
Sealing washer is destroyed. Change sealing washer.

Our provider:

Pre-Revenue Services

* Inquiry and consulting assist.
* Sample tests support.
* View our Factory & Office.
 

Soon after-Income Provider

* Warranty for 3 a long time.
* Coaching how to instal and use the machine.
* Give totally free rapid-use component.
 
Payment Phrase:

Trade Assurance

* Pay to our company’s USD financial institution transfer BY T/T.
* 100% merchandise quality protection 100% on-time cargo protection 100% payment safety.

T/T

* one hundred% T/T in advance(regular types in stock).
* 50% T/T in advance, JCPT compensated before supply(for the JCPTized models).

Our factory also have acknowledge the payment by western union,paypal and cash gram.

FAQ:
1.Query:Are you producer or trading firm?
Reply:We are maker because 1997.

two.Question:Certificates ?
Response:CE,ISO

3.Question:Shipping and delivery time?
Solution:The devices arein stock now,can be delivered as you require.

4.Query:What is theMOQ?
Answer:1 set for you check.

5.Query:Can I get some discount ?
Indeed, friend.The much more you get, the much more you conserve.

6.Issue:What is the payment?
Solution:T/T in progress,as most of our crimping device product are in stock.
L/C,western union,paypal and cash gram also can be acknowledged.

seven.Concern:Can you make JCPTized designs or Symbol?
Of program, we are specialist OEM company.

8.Concern:Can I check out your factory?
Indeed,you are warmly welcome to check out our factory at any time. Just before the visiting, make sure you speak to us first of all and confirm the browsing time, our car can pick up you to our manufacturing facility.
 

Why select JCPT FJCPTORY?

one.Large Quality CE UL ISO approved JCPT hose crimping machine.

two.Great Affordable handbook hose crimping equipment,Very best Quality you ever have.

3.Samway make the hose crimping machine up to 800mm diameter hose with 2500 ton pressing pressure.

4.Rapidly delivery, our factory can dispatch the equipment within 24 hours when get the payment and promise to ship nomally 7 doing work days on board.

Discounts available with bulk acquire

Braided hose crimper JCPT Up to 2” 6SP R15 JCPT Hose Compact in Dimension Cost-effective Great Machine

220V 240V one phase  50/60hz, 380V/400v/415v/440v 3 period device have stock.

A excellent economical braided hose crimper will crimp up to 2″ 4SP/4SH hydraulic hose,the device is equiped with most current engineering,Motor from SIEMENS company control method from SIEMENS,Rexroth hydraulic valves,NOK seal make the machine druable.

Finn energy collection braided hose crimper are primarily for service and little manufacturing goal,affordable and compact in design,best for most of your needs in hose assembly.

Major customers:RYCO,PIRTEK,PARKER United states,CATERPILAR etc.

OEM support:Our factory hydraulic hose crimping device for sale up to 30″,crimping assortment up to 1000mm available,5000 ton crimping force.

Guarantee:Our factory hose crimping device supply 3 years warranty from day of buying.

2020 New Professional Manufacturer Crimped Wire Machine Wire Crimping Machine