BNT-2000 Toddler Radiant Warmer
STHangJCPTRD COMPOSITION:
Microcontroller management open sort radiant hotter with handbook and servo program
Exhibit skin set facility, skin observed temperature in ºC and warmth electricity individually
User pleasant gentle contact panel huge and brilliant LED Screen
Ceramic infrared heating element for efficient warming
Audible and visible alarm facility for overheating past established temperature selection,
probe failure, power failure, technique failure and heater failure
Hotter will be perception the pores and skin probe failure and minimize off the heater
Warmer head will rotate and swivel in diverse course
Inbuilt battery back again- up for the duration of electricity failure
Keyboard locking facility to keep away from undesired user modification of the established parameter.
Height of the warmer will adjustable
Control panel will liquid proof and enable effortless and hygienic disinfection
JCPT alarms for patient safety
Massive mattress, fall down side panels for effortless access to new-born
Assessment lamps for effortless observation of new-born
TECHNICAL Specifications:
Observation JCPT : one thousand Lux
Color Temperature assortment : 3700k to 5100k
Affected person handle ( infant method ) : 34°C to 37.5°C in increments .1°C ( 95°F to ninety nine.5°F )
Handbook mode alter heater output : 10 – a hundred% with five% increment, auditory and visible alarm will give each fifteen min.
Temperature measurement precision: ± .3°C, resolution: ± .1°C, probe precision: ± .1°C
Hotter have with bassinet trolley. Mattress foam density 25kg/cm³, clear collapsible side wall, simple removable for cleansing, mattress size : twenty” x 28 “
Measurement of drop down five” (±1″ ) mattress surface, 6mm thick, distinct and transparent.
Bed peak about 80 ~ 100cm from the flooring and 80 ~ 90cm from the heat source.
The little one mattress is crevice totally free for ease of cleaning, an infection control and mattress utilized to be
biocompatible materials.
Heater Component : 600 watts
Heater will minimize off , if the maximum irradiance at any point of the mattress spot exceeds a overall irradiance stage of 10mw/cm² or over 60% of the heater output ( amongst ten to thirty min)
Bed tilt system : -10-15°
Pores and skin temperature probe size : ≤ 10mm dia three~ 4mm thick ( biocompatible), pliable probe wire and non-stiff
Castor wheels two are lockable
Ambient temperature : ten-40°C
Relative Humidity : 15 – 90%
Electrical power source : 220-240VAC, 50Hz
Accessories:
1.Mattress-one No.
2.IV pole-1 No.
3.Skin Probe-1 No.
four.X-ray cassette tray-one No
5.Operational and support manual – 1 set every single
Bundle: 110cm×90cm×110cm 1.1mthree