1450-Straight line- double aspect-lock-bottom-four-6corner purpose
Folding Gluing Machine
Qualities:
one.Driving by synchronous belt,make certain easy and precise working.
two.Inverter driving,steady and electricity preserving.
three.Use electrical modify,effortless run.
4.JCPTmatic steady feeding,use a number of belt with vibrating motor,(for increased configuration use drilled suction belt),to keep the feeding secure.
5.JCPTmatic counting and kicking,quantity can preset.
six.Conveyer pressure adjustable in accordance to the box to guarantee ideal good quality.
two. Principal specialized parameter:
Model | ZH-M1450 four/6 |
Suitable material | AB/BE/A/B/C/E/F flute , Card board210-850gsm |
Max technique | JCPTmatic constant feeding |
Max mechanical pace | 300m/min |
All round dimension | 19700*2300*1650mm |
Excess weight | thirteen.5T |
Power usage | 27.2KW,380V,50HZ |
Compressed air | six bar,ten m³/h,sixty L |
Machine configuration
Principal motor | GPG |
PLC | Siemens |
Inverter | Siemens |
Touch screen | Siemens |
Driving JCPT | NSK |
Plain belt | NITTA Japan |
Reduced voltage equipment | Schneider( Relays, contactor,breaker,Button) |
Photo Swap | Panasonic |
Wall thickness | 20m (right side,still left facet) tempered |
Gluing system | KQ CHINA |
Servo motor | Delta (ZheJiang ) for back fold |
Servo motor | VEICHI China (handle the folding section belt)one more business with no it |
Function:
one.Feeder Area
·Friction feeder. Independently driven by inverter.
Adjustable electronic pile vibrator.
·Lateral feed gates totally adjustable to the width of the blank.
2.Paper Alignment Method:
Unbiased section that registers the blank to a single aspect making certain a excellent parallelism just before getting into the pre-folding or gluing sections.
Independently driven by motor.
Possibility to register on any aspect of the equipment.
Fast and straightforward set up.Configuration reducer, various boxes when the conversion, the reducer with electric regulation
three.Pre-fold Segment:
The pre-fold segment has the gain to make the box a lot more simple and easy to open up,even in some case the scoring is not extremely effectively.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding set up to 135º.
1st and third crease openers.
Configuration reducer, diverse boxes when the conversion, the reducer with electrical regulation
four.Base Lock Area
Lock-base assembly mechanism with higher elastic hookers is of deal layout,quick and effortless procedure.
·Independently pushed by motor.
Complete set of folding hooks and helixes for smooth and precise folding of entrance flaps
Adjustable hook tension.
Fast and straightforward set up
Configuration reducer, various containers when the conversion, the reducer with electric regulation.
five.Down Gluing section
·Two reduce (remaining and correct) gluing tanks.
·Easy to eliminate and cleanse.
6.Folding Section
Independently pushed by motor.
JCPT and correct folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable velocity controlled by inverter
Easy accessibility.
Configure the servo motor to modify the belt pace,Make the box much more neat
7.Trombone Section
·Independently pushed by motor.
·Upper and reduce drive mechanism for length adjustment.
·Allows a ideal understack or overstack stream of bins.
·Equipped with computerized belt stress-altering method.
·Continuous and computerized box selection system that ensures a neat transfer to the Press segment, guaranteeing an aligned stream.
8.Push Section
·Independently motorized pneumatic press segment.
·Upper area moves back again and ahead through a motorized program, making it possible for various box length.
·Pneumatic strain regulation.
nine.Again-folding gadget
·Motorized and untimed digital again folding program with intelligent servo-motor technologies.
·Two unbiased servo motors, one particular for every shaft.
·Versatile and effortless to setup.
Gluing program
one. Major technological parameter:
Model HZ4
Enter voltage | AC220V (±20%)fifty-60HZ | |
Power | 480W | |
Glue-like precision | ±1mm | |
Gel-level | four sorts | |
Design | HB6 | |
Guns | three | |
To adhesives max viscosity | 3000mPas | |
Each and every two-way transportation performance | 6:one | |
Gas source enter specifications | 2-8bar | |
Fat | 25kg | |
Dimension | 1280*480*600mm |
Plasma Floor Therapy
Major technical parameter:
Model | Cleanse-PL-5571 | |
Input voltage | AC220V | |
Nominal electricity | 1500AV | |
Plasma energy supply frequency | twenty-30khz | |
Air supply pressure | 60L/m³ | |
Dimension | 720*970*1270 | |
Outlet angle | <20mm | |
2 guns | ||
Weight | 95kg |