1450-Straight line- double aspect-lock-bottom-four-6corner perform
Folding Gluing Machine
one.Driving by synchronous belt,make sure sleek and correct operating.
2.Inverter driving,stable and electricity saving.
three.Use electric modify,straightforward run.
4.JCPTmatic ongoing feeding,use multiple belt with vibrating motor,(for increased configuration use drilled suction belt),to maintain the feeding steady.
5.JCPTmatic counting and kicking,amount can preset.
6.Conveyer pressure adjustable in accordance to the box to guarantee greatest good quality.
2. Major technical parameter:
|Appropriate material||Card board210-850gsm , A/B/C/E/F flute corrugated board|
|Max strategy||JCPTmatic continuous feeding|
|Max mechanical speed||300m/min|
|Electricity intake||21.5 KW,380V,50HZ|
|Compressed air||6 bar,10 m³/h,60 L|
Standard & Optional configuration record
|two||Paper Alignment Section||√|
|4||Crash lock bottom part||√|
|5||Upper paste barrel gear||√|
|6||Down pasting tools||√|
|9||Plasma treatment system|
|10||Folding and closing section||√|
·Friction feeder. Independently pushed by inverter.
Adjustable electronic pile vibrator.
·Lateral feed gates totally adjustable to the width of the blank.
two.Paper Alignment Method:
Unbiased area that registers the blank to one particular side ensuring a best parallelism before getting into the pre-folding or gluing sections.
Independently driven by motor.
Possibility to sign up on any aspect of the machine.
Fast and simple set up.Configuration reducer, different bins when the conversion, the reducer with electric powered regulation
The pre-fold segment has the gain to make the box a lot more plain and straightforward to open up,even in some scenario the scoring is not quite properly.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding set up to 135º.
1st and 3rd crease openers.
Configuration reducer, various containers when the conversion, the reducer with electrical regulation
four.Base Lock Segment
Lock-base assembly mechanism with high elastic hookers is of deal style,quickly and easy procedure.
·Independently driven by motor.
Complete set of folding hooks and helixes for smooth and exact folding of front flaps
Adjustable hook stress.
Fast and effortless set up
Configuration reducer, diverse bins when the conversion, the reducer with electrical regulation.
5.Down Gluing part
·Two reduced (remaining and proper) gluing tanks.
·Easy to eliminate and cleanse.
Independently pushed by motor.
JCPT and accurate folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable pace controlled by inverter
Configure the servo motor to alter the belt velocity,Make the box more neat
·Independently driven by motor.
·Upper and reduced generate mechanism for size adjustment.
·Allows a ideal understack or overstack stream of containers.
·Equipped with computerized belt rigidity-modifying method.
·Continuous and computerized box collection mechanism that guarantees a neat transfer to the Push part, guaranteeing an aligned movement.
·Independently motorized pneumatic push section.
·Upper part moves again and forward via a motorized method, enabling different box length.
·Pneumatic stress regulation.
one. Principal specialized parameter:
|Input voltage||AC220V (±20%)50-60HZ|
|To adhesives max viscosity||3000mPas|
|Each and every two-way transport efficiency||6:one|
|Gasoline source input demands||two-8bar|
Plasma Floor Remedy
Primary complex parameter:
|Plasma electricity supply frequency||20-30khz|
|Air supply strain||60L/m³|