1450-Straight line- double side-lock-base-4-6corner purpose
Folding Gluing Machine
one.Driving by synchronous belt,guarantee easy and accurate managing.
2.Inverter driving,steady and electrical power preserving.
3.Use electric powered change,simple function.
four.JCPTmatic steady feeding,use a number of belt with vibrating motor,(for greater configuration use drilled suction belt),to hold the feeding stable.
5.JCPTmatic counting and kicking,quantity can preset.
six.Conveyer pressure adjustable according to the box to make sure very best high quality.
2. Main technological parameter:
|Suitable content||Card board210-850gsm , A/B/C/E/F flute corrugated board|
|Max strategy||JCPTmatic ongoing feeding|
|Max mechanical speed||300m/min|
|All round dimension||17600*2300*1650mm|
|Electricity consumption||21.5 KW,380V,50HZ|
|Compressed air||6 bar,10 m³/h,60 L|
Standard & Optional configuration record
|2||Paper Alignment Part||√|
|four||Crash lock base segment||√|
|5||Upper paste barrel products||√|
|six||Down pasting products||√|
|nine||Plasma remedy program|
|ten||Folding and closing area||√|
·Friction feeder. Independently pushed by inverter.
Adjustable electronic pile vibrator.
·Lateral feed gates fully adjustable to the width of the blank.
two.Paper Alignment Method:
Impartial area that registers the blank to a single side guaranteeing a best parallelism ahead of moving into the pre-folding or gluing sections.
Independently pushed by motor.
Possibility to sign-up on any aspect of the device.
Fast and easy set up.Configuration reducer, various bins when the conversion, the reducer with electric regulation
The pre-fold section has the advantage to make the box a lot more simple and straightforward to open up,even in some scenario the scoring is not really nicely.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding established up to 135º.
1st and third crease openers.
Configuration reducer, various containers when the conversion, the reducer with electrical regulation
four.Bottom Lock Area
Lock-base assembly system with substantial elastic hookers is of deal design,fast and easy operation.
·Independently driven by motor.
Complete established of folding hooks and helixes for clean and correct folding of entrance flaps
Adjustable hook pressure.
Fast and easy setup
Configuration reducer, distinct boxes when the conversion, the reducer with electrical regulation.
five.Down Gluing part
·Two reduce (still left and appropriate) gluing tanks.
·Easy to eliminate and thoroughly clean.
Independently pushed by motor.
JCPT and precise folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable speed managed by inverter
Configure the servo motor to modify the belt pace,Make the box more neat
·Independently pushed by motor.
·Upper and lower generate system for length adjustment.
·Allows a perfect understack or overstack stream of containers.
·Equipped with computerized belt tension-modifying method.
·Continuous and computerized box collection system that assures a neat transfer to the Push area, guaranteeing an aligned flow.
·Independently motorized pneumatic press area.
·Upper section moves back again and ahead via a motorized method, permitting different box duration.
·Pneumatic force regulation.
1. Major complex parameter:
|Input voltage||AC220V (±20%)fifty-60HZ|
|To adhesives max viscosity||3000mPas|
|Each two-way transportation effectiveness||six:1|
|Gasoline resource enter demands||2-8bar|
Plasma Floor Treatment method
Principal technological parameter:
|Nominal electrical power||1500AV|
|Plasma power offer frequency||twenty-30khz|
|Air offer force||60L/m³|