1450-Straight line- double facet-lock-bottom-4-6corner operate
Folding Gluing Machine
1.Driving by synchronous belt,guarantee easy and accurate running.
two.Inverter driving,stable and energy conserving.
three.Use electrical change,straightforward function.
4.JCPTmatic steady feeding,use a number of belt with vibrating motor,(for increased configuration use drilled suction belt),to preserve the feeding secure.
five.JCPTmatic counting and kicking,amount can preset.
six.Conveyer stress adjustable according to the box to guarantee ideal high quality.
two. Major complex parameter:
|Ideal materials||Card board210-850gsm , A/B/C/E/F flute corrugated board|
|Max technique||JCPTmatic constant feeding|
|Max mechanical pace||300m/min|
|Electrical power usage||21.5 KW,380V,50HZ|
|Compressed air||6 bar,ten m³/h,sixty L|
Regular & Optional configuration listing
|two||Paper Alignment Segment||√|
|four||Crash lock base area||√|
|five||Higher paste barrel gear||√|
|six||Down pasting equipment||√|
|nine||Plasma treatment program|
|ten||Folding and closing segment||√|
·Friction feeder. Independently driven by inverter.
Adjustable electronic pile vibrator.
·Lateral feed gates completely adjustable to the width of the blank.
2.Paper Alignment Technique:
Unbiased part that registers the blank to a single facet ensuring a best parallelism just before entering the pre-folding or gluing sections.
Independently driven by motor.
Possibility to sign up on any side of the device.
Fast and simple setup.Configuration reducer, different boxes when the conversion, the reducer with electric regulation
The pre-fold section has the advantage to make the box far more simple and simple to open up,even in some scenario the scoring is not very nicely.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding established up to 135º.
1st and third crease openers.
Configuration reducer, different boxes when the conversion, the reducer with electric powered regulation
four.Base Lock Part
Lock-base assembly mechanism with high elastic hookers is of offer layout,fast and straightforward operation.
·Independently driven by motor.
Complete set of folding hooks and helixes for smooth and precise folding of front flaps
Adjustable hook tension.
Fast and simple set up
Configuration reducer, distinct boxes when the conversion, the reducer with electrical regulation.
five.Down Gluing segment
·Two reduce (still left and right) gluing tanks.
·Easy to remove and thoroughly clean.
Independently driven by motor.
JCPT and precise folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable pace controlled by inverter
Configure the servo motor to modify the belt pace,Make the box more neat
·Independently pushed by motor.
·Upper and reduce generate mechanism for length adjustment.
·Allows a best understack or overstack stream of bins.
·Equipped with computerized belt stress-altering system.
·Continuous and automatic box assortment mechanism that ensures a neat transfer to the Press section, guaranteeing an aligned movement.
·Independently motorized pneumatic press segment.
·Upper section moves back again and forward by way of a motorized technique, permitting distinct box length.
·Pneumatic stress regulation.
one. Principal technological parameter:
|Input voltage||AC220V (±20%)50-60HZ|
|To adhesives max viscosity||3000mPas|
|Every two-way transport performance||six:one|
|Gasoline source input requirements||two-8bar|
Plasma Surface area Treatment
Primary technological parameter:
|Plasma energy provide frequency||twenty-30khz|
|Air source stress||60L/m³|