1450-Straight line- double aspect-lock-base-4-6corner function
Folding Gluing Machine
one.Driving by synchronous belt,guarantee smooth and precise managing.
two.Inverter driving,steady and power conserving.
three.Use electric adjust,straightforward run.
four.JCPTmatic ongoing feeding,use a number of belt with vibrating motor,(for higher configuration use drilled suction belt),to maintain the feeding steady.
5.JCPTmatic counting and kicking,quantity can preset.
6.Conveyer strain adjustable in accordance to the box to make sure best good quality.
2. Principal complex parameter:
|Ideal material||Card board210-850gsm , A/B/C/E/F flute corrugated board|
|Max technique||JCPTmatic continuous feeding|
|Max mechanical velocity||300m/min|
|Electricity use||21.5 KW,380V,50HZ|
|Compressed air||six bar,ten m³/h,60 L|
Normal & Optional configuration checklist
|2||Paper Alignment Segment||√|
|4||Crash lock base part||√|
|five||Higher paste barrel products||√|
|six||Down pasting products||√|
|nine||Plasma therapy method|
|ten||Folding and closing area||√|
·Friction feeder. Independently pushed by inverter.
Adjustable digital pile vibrator.
·Lateral feed gates entirely adjustable to the width of the blank.
two.Paper Alignment Program:
Independent section that registers the blank to 1 aspect guaranteeing a ideal parallelism just before getting into the pre-folding or gluing sections.
Independently driven by motor.
Possibility to sign up on any aspect of the equipment.
Fast and simple set up.Configuration reducer, distinct bins when the conversion, the reducer with electric regulation
The pre-fold segment has the advantage to make the box a lot more simple and simple to open up,even in some situation the scoring is not extremely well.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding set up to 135º.
1st and third crease openers.
Configuration reducer, various bins when the conversion, the reducer with electric powered regulation
four.Bottom Lock Segment
Lock-base assembly system with high elastic hookers is of offer layout,quickly and effortless operation.
·Independently pushed by motor.
Complete established of folding hooks and helixes for clean and exact folding of front flaps
Adjustable hook tension.
Fast and simple set up
Configuration reducer, different bins when the conversion, the reducer with electric powered regulation.
5.Down Gluing segment
·Two reduced (remaining and appropriate) gluing tanks.
·Easy to eliminate and cleanse.
Independently pushed by motor.
JCPT and correct folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable pace controlled by inverter
Configure the servo motor to alter the belt pace,Make the box a lot more neat
·Independently pushed by motor.
·Upper and reduced drive system for duration adjustment.
·Allows a best understack or overstack stream of containers.
·Equipped with automatic belt stress-modifying program.
·Continuous and computerized box collection mechanism that assures a neat transfer to the Press section, guaranteeing an aligned movement.
·Independently motorized pneumatic press section.
·Upper part moves back and forward by means of a motorized system, enabling distinct box size.
·Pneumatic stress regulation.
one. Major complex parameter:
|Enter voltage||AC220V (±20%)fifty-60HZ|
|To adhesives max viscosity||3000mPas|
|Every single two-way transport performance||six:one|
|Fuel supply enter specifications||2-8bar|
Plasma Area Treatment
Primary technological parameter:
|Plasma electrical power source frequency||20-30khz|
|Air provide pressure||60L/m³|