780-lock base-double aspect-straight line
Folding Gluing Machine
Qualities:
1.Driving by synchronous belt,guarantee smooth and correct working.
2.Inverter driving,secure and energy saving.
3.Use electric powered adjust,easy operate.
four.JCPTmatic ongoing feeding,use several belt with vibrating motor to maintain the feeding secure.
five.JCPTmatic counting and kicking,quantity can preset.
six.Conveyer pressure adjustable according to the box to make sure greatest good quality.
two. Primary technological parameter:
Product | ZH-780-Pc |
Appropriate material | Card board 210-800gsm/E flute |
Max approach | JCPTmatic constant feeding |
Max mechanical speed | 350m/min |
Total dimension | 14000*1500*1400mm |
Excess weight | five.5T |
Electricity use | eleven.8KW, 380V, 50HZ |
Compressed air | six bar,ten m³/h,60 L |
Device configuration
Main motor | Siemens |
Contact display | Siemens |
PLC | Siemens |
Inverter | Siemens |
Drive JCPT | NSK |
Wall thickness | Double aspect 20mm tempered |
Feeding belt | NITTA |
Plain belt | NITTA Japan |
Circuit Breaker | Schneider |
Rely | Schneider |
Button | Schneider |
Swap electrical power supply | Schneider |
Picture Swap | Panasonic |
Attribute:
1.Feeder Segment
With independent transmission,low noise,with entrance adjustable wheels,max functioning potential can be accomplished.
Feeding knives and left and appropriate registers correcting bar are controlled up and down by pneumatic program very easily.
Feeding knifes are equipped with pneumatic system for smoother feeding.
Configure the display, real-time monitoring of the paper is regular.
two.Paper Alignment Program:
JCPTmatic alignment technique to appropriate the paper feeding,avoiding the paper likely to sides.
Configure the transmission to change the belt speed,Make the box more neat.
three.Pre-fold Section:
The pre-fold section has the benefit to make the box much more basic and easy to open,even in some circumstance the scoring is not quite properly.
• Left hand glue flap pre-folder up to 180º.
• third crease pre-folding set up to 135º.
• 1st and 3rd crease openers.
Configuration reducer, various boxes when the conversion, the reducer with electric powered regulation
4.Bottom Lock Section
Massive-volume design,when the device is running at higher velocity,the glue will not go out or leaking .Optional
bottle is good for long time operation.
Lock-base assembly system with higher elastic hookers is of deal design and style,quickly and simple procedure.
Configuration reducer, different boxes when the conversion, the reducer with electric powered regulation
5.Down gluing part
Two facet gluing tank.(correct and still left)
Straightforward to eliminate and clear
6.Folding Section
Equipped with speed variator for belts,ensure the folded boxes parallel and in good order
Quickly,convenient adjustment and operation can fold boxes perfectly
The middle up and down transmission module can fold boxes synchronously or alternately
Configuration reducer, distinct bins when the conversion, the reducer with electric regulation.
7.Trombone Section
• Constant and automatic box selection mechanism that assures a neat transfer to the Push area, guaranteeing a wellaligned flow.
Configure the Siemens contact screen personal computer speed can be modified
eight.Press part
• Manual and computerized pace variation in coordination with a photocell.
Gluing system
one. Major technical parameter:
Model HZ4
Input voltage | AC220V (±20%)fifty-60HZ | |
Energy | 480W | |
Glue-like precision | ±1mm | |
Gel-stage | 4 varieties | |
Model | HB6 | |
Guns | three | |
To adhesives max viscosity | 3000mPas | |
Each and every two-way transport efficiency | six:1 | |
Gasoline source enter demands | 2-8bar | |
Fat | 25kg | |
Size | 1280*480*600mm |
Plasma Surface Treatment
Primary complex parameter:
Design | Cleanse-PL-5571 | |
Input voltage | AC220V | |
Nominal electrical power | 1500AV | |
Plasma energy supply frequency | 20-30khz | |
Air source strain | 60L/m³ | |
Dimension | 720*970*1270 | |
Outlet angle | <20mm | |
two guns | ||
Bodyweight | 95kg |