Merchandise Description
SMRY Reducer Specification
1 Twin Tapered Output Hub
A tapered bore in both sides of the reducer’s output hub snugs up against a matching taper on the outer surface of the bushing. Bushing mounting screws pass by way of the bushingflange into a mounting collar on the hub. As the screws are tightened, the bushing moves inward, gripping the driven machine’s input shaft tightly and evenly around every pointon its circumference. It is easy-on, easy-off. All the Output Bushing Bore accord to ANSI
two Precrisio. n High Qua lity Gearing
C ompu ter D e s i g n He lical .Gears, Robust Alloy Materials for High Load Potential, Circumstance Carburized for long life, Ground Profile Crown tooth Profile, In
Conformance with ISO 1328-1997, 98% Efficiency for Per Stage, Smooth Quiet Operation with Several Teeth in Mesh.
3 Maximum Capacity Housing Style
Shut Grain Cast Iron Construction, Excellent Vibration Dampening & Shock Resistance Characteristics, Precision Bored and Dowelled to Make sure Correct In-Line Assembly.
4 Strong Alloy Metal Shafts
Sturdy Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions,for Maximum Load and Maximum Torsional Loads. Generous Dimension Shaft
Keys for Shock Loading .
5 Use adapter for mount the torque arm, increase the strength of the gear case, the torque armeasy-on and easy-off and dependability, controls position of standard torque arm mounting within recommended limits.
6 BackStops
Option Areas, anti-run back device, are available on all 15:1 and 25:1 ratio units.
seven Bearings and Oilseals
Bearings are all tapered roll bearings(Except SMRY-2), have long time service time. Oilsealsare Double Lipped Garter Spring Type, Guaranteeing Effective Oil
Sealing.
8 Torque Arm Assembly
For Simple Adjustment of the Belt.
size | Nominal ratio fifteen:one | Nominal ratio 25:one | fat lbs |
||||
Actual Ratio | Maximum Enter rpm | Maximum Ouput rpm | Actual Ratio | Highest Input rpm | Optimum Ouput rpm | ||
SMRY-two | fourteen.04 | 1974 | one hundred forty | 23.37 | 1994 | eighty five | fifty eight |
SMRY-3 | 14.87 | 2083 | 140 | 24.seventy five | 2100 | eighty five | ninety eight |
SMRY-4 | fifteen.thirteen | 2118 | a hundred and forty | 24.38 | 2072 | eighty five | 139 |
SMRY-five | fifteen.4 | 1925 | 125 | 25.56 | 2044 | eighty | 207 |
SMRY-6 | fifteen.34 | 1916 | one hundred twenty five | twenty five.fourteen | 2571 | eighty | 285 |
SMRY-seven | 15.23 | 1827 | one hundred twenty | 24.84 | 1863 | 75 | 462 |
SMRY-eight | fifteen.08 | 1809 | 120 | 24.sixty two | 1847 | 75 | 633 |
SMRY-nine | fifteen.12 | 1814 | a hundred and twenty | twenty five.66 | 1925 | seventy five | 760 |
size SMRY-2, 3,4,5,6,7,8,9 , ratio fifteen:1 ,25:1
Company Profile
l The premier maker and exporter of worm gear reducers in Asia.
l Established in 1976, we transformed from a county owned manufacturing facility to private 1 in 1996. HangZhou SINO-DEUTSCH Power TRANSMISSION Products CO.,LTD is our new identify given that 2001.
l We are the 1st company of reducers and gearboxes in China who was provided export license given that 12 months 1993.
l “Fixedstar” manufacturer gearboxes and reducers are the very first proprietor of CHINA Top Manufacturer and Most Well-known Trade Mark for reducers.
Initial to achieve ISO9001 and CE Certification between all manufacturers of gearboxes in China.
As a specialist company of worm gearbox and worm equipment reducers in China, we mainly produce reduction gearbox,aluminum case worm gearboxes,arc equipment cylindrical worm gearboxes, worm equipment reducers, in line helical gearboxes, and cyclo generate reducers, and many others. These items feature rational composition, secure overall performance, and reputable top quality, and so on. They are broadly utilised in electricity, mining, metallurgy, creating materials, chemical, foods, printing, ceramic, paper-making, tobacco, and other industries.
We have 600 staff in our manufacturing unit, which addresses 70,000 sq. meters in HangZhou. We have been creating 2,five hundred units of reducers every day considering that 2012. We are proudly exporting 70% of our merchandise to much more than forty nations all more than the word. Our customers appear from Italy, Germany, United states of america, Canada, Spain, United kingdom, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial nations in the world. thirty% of them are OEM made for immediate manufacturers of other merchandise.
We warmly welcome clients from other elements of the entire world to go to us. Observing is believing. We are really confident that right after browsing our facility, you will have self confidence on our goods. We have the latest automatic equipments and skilled workers to make certain the stable good quality and massive output. We have the most advanced technical and engineering group to assist most demanding necessity on common and OEM products.
Seeking forward to assembly you in HangZhou, China.
US $198 / Piece | |
1 Piece (Min. Order) |
###
Size: | 2-9 |
---|---|
Transport Package: | Standard Export Packing and Wood Pallets Packing |
Specification: | CE, |
Trademark: | FIXEDSTAR |
Origin: | Hangzhou, Zhejiang |
###
Customization: |
Available
|
---|
###
size | Nominal ratio 15:1 | Nominal ratio 25:1 | weight lbs |
||||
Actual Ratio | Maximum Input rpm | Maximum Ouput rpm | Actual Ratio | Maximum Input rpm | Maximum Ouput rpm | ||
SMRY-2 | 14.04 | 1974 | 140 | 23.37 | 1994 | 85 | 58 |
SMRY-3 | 14.87 | 2083 | 140 | 24.75 | 2100 | 85 | 98 |
SMRY-4 | 15.13 | 2118 | 140 | 24.38 | 2072 | 85 | 139 |
SMRY-5 | 15.4 | 1925 | 125 | 25.56 | 2044 | 80 | 207 |
SMRY-6 | 15.34 | 1916 | 125 | 25.14 | 2010 | 80 | 285 |
SMRY-7 | 15.23 | 1827 | 120 | 24.84 | 1863 | 75 | 462 |
SMRY-8 | 15.08 | 1809 | 120 | 24.62 | 1847 | 75 | 633 |
SMRY-9 | 15.12 | 1814 | 120 | 25.66 | 1925 | 75 | 760 |
US $198 / Piece | |
1 Piece (Min. Order) |
###
Size: | 2-9 |
---|---|
Transport Package: | Standard Export Packing and Wood Pallets Packing |
Specification: | CE, |
Trademark: | FIXEDSTAR |
Origin: | Hangzhou, Zhejiang |
###
Customization: |
Available
|
---|
###
size | Nominal ratio 15:1 | Nominal ratio 25:1 | weight lbs |
||||
Actual Ratio | Maximum Input rpm | Maximum Ouput rpm | Actual Ratio | Maximum Input rpm | Maximum Ouput rpm | ||
SMRY-2 | 14.04 | 1974 | 140 | 23.37 | 1994 | 85 | 58 |
SMRY-3 | 14.87 | 2083 | 140 | 24.75 | 2100 | 85 | 98 |
SMRY-4 | 15.13 | 2118 | 140 | 24.38 | 2072 | 85 | 139 |
SMRY-5 | 15.4 | 1925 | 125 | 25.56 | 2044 | 80 | 207 |
SMRY-6 | 15.34 | 1916 | 125 | 25.14 | 2010 | 80 | 285 |
SMRY-7 | 15.23 | 1827 | 120 | 24.84 | 1863 | 75 | 462 |
SMRY-8 | 15.08 | 1809 | 120 | 24.62 | 1847 | 75 | 633 |
SMRY-9 | 15.12 | 1814 | 120 | 25.66 | 1925 | 75 | 760 |
Different Types of Shaft Collars and How to Choose the Right One For Your Needs
A shaft collar is a simple machine component, but its role is crucial in a variety of power transmission applications. It is most commonly found in gearboxes and motors. Its simple design makes it a relatively easy component to install. In addition to being useful for bearing faces, shaft collars are also used as mechanical stops.
Single split shaft collars
Single split shaft collars are a common design choice for industrial applications. They provide easy installation and disassembly, reducing downtime and labor. Unlike traditional collars, they use full seating torque of set screws, resulting in even distribution of forces along the shaft circumference. In addition, they provide stronger holding power.
Single split shaft collars are available in a variety of sizes and materials. They are typically made of stainless steel, alloyed steel, or nylon. They are available with a black oxide finish or a smooth finish. In addition, they can be manufactured to custom sizes. The benefits of shaft collars manufactured by Power Rite are the high quality of their materials and the close tolerances of their manufacturing process.
Single split shaft collars are available in D-bore or hex bore configurations. They are designed to fit shafts with diameters from 1/4″ to 6″. Some of these types also have a proprietary black oxide finish. Single split shaft collars can be manufactured with a range of materials, including 303 stainless steel and 1215 lead-free steel. They can also be made with engineered plastic.
Single split shaft collars are an excellent choice for applications where accurate positioning is essential. These collars can be easily installed and removed without removing any of the shaft components. They feature double grub screws to help tighten the clamp around the shaft. This feature makes installation and removal easier and reduces downtime.
Single split shaft collars are also available in a lightweight style for applications where space is an issue. While these collars are ideal for light-duty applications, they are not ideal for heavy-duty environments. Single split shaft collars are generally made of a softer material, such as steel. They have high torque capacities and hold securely around a shaft. However, their high holding power and low friction means they can damage a shaft or cause indentations that make repositioning the shaft difficult.
Clamp-style shaft collars are another option for tougher installations. This type offers more clamping power than a one-piece shaft collar. They come in either a one-piece or two-piece design, and can be installed by hand.
Set screw collars
Set screw collars are used to secure shafts. They are available in a variety of sizes and materials. Available options include hex socket, cup point, and 3A thread screws. They are suitable for a variety of industries, including food, wood, and chemical. A distributor of set screw collars can custom-design them to meet the specifications of a given application.
There are many different types of shaft collars, which include socket set screw collars, 2-hole set screw collars, and metric and stainless steel collars. In addition to these, you can also find corrosion-resistant set screw collars with a black oxide finish. These collars are ideal for industrial and commercial applications and are RoHS compliant.
Set screw collars are the most cost-effective option for shaft collars. They also offer lightweight options for applications where space is at a premium. Additionally, they can be equipped with a second screw positioned at 90 degrees to provide additional load capacity. They also come with a keyway to accommodate keyed shafts. These collars provide a reliable solution for securing shafts in a variety of applications.
Compared to set screw collars, clamp-style collars are easier to install and have greater holding power. They are available in one and two-piece versions. Clamp style collars are designed to lock onto a shaft while not damaging it. In addition, they are easily removed and reinstalled. They can be used in a variety of settings, including in guiding systems and bombsights.
Set screw shaft collars are an excellent choice for applications where precision is important. They prevent shafts from moving and hold power transmission components in place. The set screw collar is set in place with a grub screw or set screw. The screw driver can adjust the set screw to achieve the desired position.
Quick-clamp shaft collars
Quick-clamp shaft collars are a simple yet effective way to secure shafts. These collars have an eccentric lever that generates a locking force on the shaft. They are easy to install and remove and are manufactured with an aluminum design. In addition, these collars have a low mass inertia value. They are available in both one-piece and two-piece styles. Both styles have outer diameter flats for mounting other components.
The Quick-clamp shaft collars are resilient and feature a flush handle. They are easy to install and adjust, eliminating the need for tools and reducing production downtime. Another feature of these collars is that they have a high-strength tension adjustment screw that ensures compatibility with a wider range of shaft tolerances. These collars also have an axial holding power adjustment screw.
CZPT manufactures two types of quick-clamp shaft collars. One type has a cam lever that sits flush with the outside diameter and is finger-actuated. The other type is a clamp-style collar with a tension-adjustment screw. This design is better suited to low-rpm applications, or for frequent changeovers.
Choosing the right shaft collar for your application
Shaft collars play a key role in many industrial applications, and choosing the correct one is critical. They need to be designed properly and have the appropriate performance characteristics to ensure safe and effective operation. In this article, we will look at the different types of shaft collars and how to choose the right one for your needs. Typically, shaft collars are made from steel or aluminum, coated with zinc or another corrosion resistant material. But they can also be made from non-metallic materials.
Shaft collars come in a variety of shapes and materials, and the right one for your application will depend on these features. The key factors to consider are the material, holding power, and surface treatment, and their alignment with your application specifications. The shaft collars that fit your application best are often highly customizable, so it is important to determine the exact specifications for your application.
Shaft collars are simple and versatile components that are used to secure bearings on a shaft. They also serve as mechanical stops and can help to align and space other components. Shaft collars are widely used in gearbox assemblies, flagpoles, medical instruments, and other applications. They are available in a wide variety of styles, and can be used for nearly any application.
The type of shaft collar you choose will depend on the application and the type of machine. A heavier duty shaft collar will provide better vibration and shock resistance. These collars are typically designed for off-road or mining applications, and can be made of heavy-duty steel. They also provide more holding power, as double-wide shaft collars can provide an additional 25% of holding power.
When choosing a shaft collar, it’s important to consider the application and the required level of maintenance. Some assemblies will only need minor adjustments, while others require frequent disassembly. A two-piece shaft collar is a better option for assemblies that will have to be removed often.
editor by czh 2023-01-20